IRiver PMP-120 Instruction Manual page 55

5-3. Troubleshooting!
Should any problem continue after you have checked these symptoms,
please contact iRiver customer support.
Trouble
Adjust the position of the player and remote control
(Option).
Electronic equipment can cause interference with
the FM reception. Turn off any nearby electronics or
Poor FM
move the player away from the source.
Reception
The earphones and remote control (Option) are the
antenna and reception will be poor unless one or
the other are attached to the device.
Nothing is
Check the TV/HOLD/LCD switch is set to TV.
displayed on the
When set to TV, no image will display on the LCD
LCD screen.
screen.
Image on TV is
What kind of TV do you use?
unstable,
Often display errors on TV are caused by an
flickering, fuzzy,
improper setting. Disconnect the player from your
or otherwise
TV and change the NTSC/PAL setting in the Setup
non-viewable.
menu. See page 87 for details.
Video files are
The display is determined by the settings used to
smaller than the
create the AVI file. Please consult your AVI creation
screen.
software documentation for settings.
When playing a video file, the loading time of a
motion picture is longer than the MP3 or WMA
formats because file size to read is larger than MP3
or WMA files.
The video file may not conform to the specifications
Video files do
of the PMP.
not display
Consult your video source and the specifications
properly.
section of this manual for details.
AVI files created in higher resolutions than
indicated in the Specifications section may not
playback properly.
Additional
Information
Solution
107
5-3. Troubleshooting!
Trouble
The image file may not conform to the
Image files does
specifications of the PMP. Consult the specifications
not display.
section of this manual for details.
While playing audio file, the display is automatically
Display turns off
turned off to save the battery as the set time passes.
repeatedly.
You can adjust the backlight time on the Setup Menu.
Check whether VOLUME is set to 0 .
Connect the earphone/remote plug firmly.
Check whether the plug is dirty (clean the plug with a
Audio files do not
dry and soft cloth).
play properly.
Either no sound
Corrupted MP3, WMA, ASF or AVI file may have
is heard or
distortion or not play.
defects are
Try playing another music file.
heard.
Excessive jolting and constant vibration may affect
playback. Use the device in a more stable
environment.
Characters in
Check out Menu General Language and confirm
LCD are
whether the right language has been selected.
corrupted.
Check whether the adapter plug is properly
connected.
Batteries do not
charge.
Fully charged batteries will not accept additional
charging.
Additional
Information
Solution
108