Basic Operation - IRiver PMP-120 Instruction Manual

2-3. Connecting and installation
Operate the software
5 5 5 5
Safely removing the player from the PC
1
Click the "Safely removing device" icon
in the PC tray.
2
Click "Stop iRiver PMP-100-Driver (X)" or "Safely Remove TOSHIBA
MK1 3GAL USB Disk Drive (X:)". (Where X is the drive letter
assigned to the PMP) Click the following popup message.
3
Click the Confirm button in the hardware safe removal window
4
Disconnect the USB cable between
the player and host PC.
The following message is displayed in
the LCD screen.
Note Note
The tray icon may be hidden in some Windows XP operating system settings.
Click the "Display hidden icon" to view the hidden icon.
Hardware safe removal may not be available while using some applications such
as Windows Explorer or Windows Media Player. Please close all applications
using the player before the hardware safe removal process.
In some Windows XP operation system settings, hardware safe removal is
temporarily unavailable due to some internal system communication.
Getting started
DISCONNECTING
DISCONNECTING
33

3-1. Basic operation

Turning on/off the player
1 1 1 1
Turning on the player
1
Connect the remote control
(Option) or earphones.
2
Put the HOLD switch to LCD
3
Press and hold the POWER
button to turn on the player.
Note
Note
The following icons are displayed to indicate HOLD status.
: The HOLD function is set in both the player and the remote control
(Option).
: The HOLD function is set in the player.
: The HOLD function is set in the remote control (Option).
When stopped or in recording standby mode, the player automatically
turns off according to the setting of "STOP POWER OFF" on the
Setup.
Basic operation
34