JVC Everio GZ-HD7 Instructions Manual page 71

Menus
P PRIORITY SETTING
Set whether to project the
image onto the LCD monitor or
viewfinder when both are open.
l
DISPLAY
Enables you to set whether to
display the on-screen display.
% DISPLAY ON TV
Used for displaying camera's on-
screen display on a TV screen.
R VIDEO/S OUTPUT
Set the television screen size
(16:9/4:3) of the connected
television when outputting from
the AV/S connector.
S COMPONENT OUTPUT
Set the definition of the video
output from the COMPONENT
connector.
T HDMI OUTPUT
Set the definition of the video
output from the HDMI connector.
U HDMI COLOR SETTING
Set the video format of the video
output from the HDMI connector.
V HDMI ENHANCE SETTING
Select whether or not to
automatically adjust the image
quality (depth of color, dark color
suppression etc) of video output
when connecting to the TV's DVI
connector.
W i.LINK OUTPUT (DUB)
When using the i.LINK connector
to copy files, set according to the
type of device connected or file
picture quality.
Settings: [ ] = Factory-preset
[LCD MONITOR]: Projects the image onto the LCD
monitor.
FINDER: Projects the image onto the viewfinder.
OFF: Turns off the on-screen display.
[ON]: Turns on the on-screen display.
[OFF]: Does not display on TV.
ON: Displays on TV.
NOTE
When connected to a TV using the i.LINK cable, the
camera's on-screen display is not displayed on the TV, even
if this setting is [ON].
4:3 / [16:9]
[480i]: Outputs at 480i.
1080i: Outputs at 1080i.
[AUTO]: The definition that best suits the connected
device is automatically selected in the following
order: 1080i, 480p.
480p: Outputs at 480p. Select when the video is not
projected correctly.
[AUTO]: Select this under normal circumstances.
RGB: Select when the video is not projected correctly.
[OFF]: Image quality is not automatically adjusted.
ON: Image quality is automatically adjusted.
DV: Select when copying with a device that supports
DV input.
[1440 CBR]: Select when copying video that was
recorded with [1440 CBR] set as the [QUALITY].
1