JVC Everio GZ-HD7 Instructions Manual page 68

Changing the Menu Settings (Continued)
n
QUALITY QUALITY
Enables you to set the picture
quality for videos.
@
ZOOM ZOOM
Enables you to set the maximum
zoom ratio.
q
OIS OIS
Compensates for hand shake.
p
GAIN UP GAIN UP
Makes the subject appear bright
automatically when you record in
dark places. However, the overall
color tones appear grayish.
o
WIND CUT
Reduces noise caused by wind.
/ REC MEDIA FOR VIDEO
Enables you to set the recording
medium for videos.
h
SCENE COUNTER
Enables you to set whether to
display the scene counter.
¦ EXTERNAL MIC LEVEL
Enables you to set whether
display the input level when the
external microphone (optional) is
connected.

Menus Settings: [ ] = Factory-preset
[FHD]: Record in 1920 x 1080i (full high-definition),
VBR (Variable Bit Rate). Select this to record in the
highest picture quality.
SP: Record in 1440 x 1080i (high-definition), VBR
(Variable Bit Rate). Select this in order to record for
a long time.
1440 CBR: Record in 1440 x 1080i (high-definition),
CBR (Constant Bit Rate). Select this to copy a
recorded video using the i.LINK connector.
NOTE
If you switch the quality settings, a new file management
folder is created in the HDD or SD card. If you change
the settings frequently, you may not be able to record due
to a limited quantity of folders. In this case, perform the
operation shown on page 79.
[10X] / 40X / 200X
NOTE
When the smallest value is set, the optical zoom is used.
When one of the larger values is set, the digital zoom is
used.
OFF: Disables the function.
[ON]: Activates the function.
NOTES
•
Accurate stabilization may not be possible if hand shake
is excessive, or depending on the shooting conditions.
•
Switch off this mode when recording with the camera on a
tripod.
OFF: Disables the function.
[ON]: Activates the function.
[OFF]: Disables the function.
ON: Activates the function.
[HDD] / SD
NOTE
When set to [SD], video picture quality will automatically be
set to [SP].
[OFF]: Disables the function.
ON: Activates the function.
OFF: Disables the function.
[ON]: Activates the function.