Registering Files To Events; Checking The Remaining Space On The Recording Media - JVC Everio GZ-HD7 Instructions Manual

Registering Files to Events

!
– mode only
If you select an event to register the file to event to register the file to
before starting recording, the file will be
registered to the selected event, thus making
the file easy to find at playback. There are up
to 3 different destinations within each event
(for example: BABY1, BABY2, BABY3).
Preparation:
•
Slide the power/mode switch to MODE to
!
select mode.
•
Press the PLAY/REC button to select
recording mode.
1
DIRECT
BACKUP
/EVENT
2
Select [ON/SELECT].
Select
Set
3
Select the event that you want to
register the file to.
•
To select a different destination, select
[NEXT PAGE].
•
To cancel the event registration, select
[NON SECTION].
Select
Set
The selected event is displayed on the screen.
Press the REC button to start recording.
8 To exit the screen
Press EVENT.
8 To search by event for a file to play back
See page 32.
NOTE
Once you select to register a file to a certain event,
the setting will remain even if you turn the power off.
Unless you change the setting, you will register a file
to the same event that you had previously selected.
CHANGE EVENT REG.
ON/SELECT
OFF
VACATION
1/ 3
NON SECTION NEXT PAGE
SELECT SET QUIT
Checking the Remaining Space on
the Recording Media –
Preparation:
•
Slide the power/mode switch to MODE to
!
select mode.
•
Press the PLAY/REC button to select
recording mode.
INDEX
The maximum recording time is displayed for
each picture quality mode.
8 To return to the normal screen
Press the 0 button again.
!
mode only
MAX RECORDING TIME
HDD
5h00m
FHD
7h00m
SP
4h56m
1440
CBR
FREE
USED