Safe Fleet DH4 Preventative Maintenance Manual

Video recorders and cameras
Hide thumbs Also See for DH4:

Advertisement

Quick Links

Preventative
Maintenance
Video Recorders and Cameras
© Safe Fleet | All rights reserved
November 2021 | Part #: 700-1259 R1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DH4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Safe Fleet DH4

  • Page 1 Preventative Maintenance Video Recorders and Cameras © Safe Fleet | All rights reserved November 2021 | Part #: 700-1259 R1...
  • Page 2: Table Of Contents

    Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 p. 2 © Safe Fleet | All rights reserved November 2021 | Part #: 700-1259 R1...
  • Page 3: Maintenance

    Maintenance Maintenance All Safe Fleet products are designed for high reliability of operation . By establishing a regular preventative maintenance program you can eliminate possible problems before they occur, protect your investment and enhance the smooth operation of your camera system .
  • Page 4: Dvr Camera & Diagnostic Checks

    Status LED description • PWR/Power = Power • HDD/SD = Storage Media Activity • LAN = Rear LAN connected • ERR = Recorder Error p. 4 © Safe Fleet | All rights reserved November 2021 | Part #: 700-1259 R1...
  • Page 5 Power LED short blinks indicate temperature too low or too high, and long blinks indicate voltage too low or too high . In some models such as DH4: • Error LED illuminates to indicate a general fault on the device.
  • Page 6: Cleaning Or Changing Fan Filters (When Applicable) And Checking Harness

    6 © Safe Fleet | All rights reserved November 2021 | Part #: 700-1259 R1...
  • Page 7: Checking Harness

    If the cables enter the cable cover through a side or rear knockout hole, is the cable grommet fully intact to protect the cables from wear? p. 7 © Safe Fleet | All rights reserved November 2021 | Part #: 700-1259 R1...
  • Page 8: Checking The Storage Media

    After removing storage media, avoid dropping or exposing them to liquids or moisture to prevent potential damage . If available, place the storage media in a protective carry case . p. 8 © Safe Fleet | All rights reserved November 2021 | Part #: 700-1259 R1...
  • Page 9: Replacing Storage Media

    Properly remove the media cartridge and wipe it down along with the receiver assembly (slot where the tray goes inside the recorder) . • Replace the media cartridge . p. 9 © Safe Fleet | All rights reserved November 2021 | Part #: 700-1259 R1...
  • Page 10: Cleaning The Dome Or Wedge Camera Window

    If you would like to remove the camera dome to clean inside, please consult the camera manual for instructions on how to disassemble and reassemble the dome after cleaning . With the dome removed, general cleaning instructions apply . p. 10 © Safe Fleet | All rights reserved November 2021 | Part #: 700-1259 R1...
  • Page 11: Technical Support

    Support Training To access a collection of Safe Fleet training tutorials, visit the Product Training page in our Safe Fleet Community Site . Documentation To read our related User Guides and Release Notes, visit the Safe Fleet Documentation Page .

Table of Contents