Resetting To Factory Defaults - Insignia NS-DV1080P User Manual

5 Press to highlight File Format, then press
SET or . The File Format screen opens.
6 Press or to highlight a file format then press
SET. You can select:
• AVI—Select this format if you are using a
Windows-based computer and/or intend to
use the included ArcSoft MediaImpression
software to view and edit movies.
• MOV—Select this format if you are using
QuickTime (not included) to view movies. This
setting is ideal for users of Mac computers.
Note: Movies cannot be edited in ArcSoft
MediaImpression if this format is selected.
Note
The file format cannot be changed after a recording
is created. You should select the file format before
you start recording.
7 Press to close the menu.

Resetting to factory defaults

Note
If you reset your camcorder to the default settings,
you will have to select the menu language and set
the date and time again. For more information, see
"Turning on your camcorder for the first time" on
page 7.
To reset your camcorder to its original factory
default settings:
1 Press to enter Record mode. The
record/power indicator on the back of your
camcorder lights blue.
2 Press SET. The menu opens.
Simple Mode
18
Simple Mode Off
3 Press
4 Press
press SET or . The Factory Reset screen opens.
5 Press
SET to confirm or press
without resetting.
www.insigniaproducts.com
NS-DV1080P 1080p HD Digital Camcorder
or to highlight the Settings tab.
or to highlight Factory Reset, then
or to select Yes or No, then press
to close the menu