Using The Security Lock - InFocus IN3902LB User Manual

4
Loosen the captive screws that attach the lamp housing to the projector.
Carefully remove the lamp housing. Dispose of the lamp in an
environmentally proper manner.
5
Install the new lamp module and tighten the screws.
6
Replace the lamp door by sliding it into place.
7
Plug in the power cord and press the Power button to turn the projector
back on.
8
To reset the lamp hour timer, navigate to the Status and Service menu and
select Reset Lamp Hours (on page 37).

Using the security lock

The projector has a security lock for use with a Cable Lock System. Refer to
the information that came with the lock for instructions on how to use it.
security lock
47
loosen screw