Optional Computer Connections - InFocus IN3114 User Manual

Optional computer connections

To get sound from the projector, connect an audio cable (optional cable, not
Connect audio cable
included) to your computer and to the Audio 1 or Audio 2 connector on the
projector. (Default settings are as follows: Audio 1 is used with VGA 1 and
VGA 2; Audio 2 is used with S-video and composite.) You can also assign a
your source to a different audio in connector, see page 23 and page 30 You
.
may also need an adapter.
If you are using a desktop computer and want to see the image on your
computer screen as well as on the projection screen, connect the computer's
Connect monitor cable
monitor cable to the Monitor Out connector on the projector.
NOTE: Only VGA video is sent to the Monitor out connector.
To display a presentation from a USB flash drive, see the Using LitePort sec-
tion on page 38. This feature eliminates the need for a computer source and
can be integrated with common wall plates and conference room input/
output panels.
To advance slides in a PowerPoint presentation using the remote control,
plug the USB cable between the projector's DisplayLink connector and your
computer. Then press the up and down arrow buttons on the remote control
to move through your slides.
9