Summary of Contents for Pioneer Woman PWS336158813055
Page 1
LOT NUMBER: DATE PURCHASED: Makeup Vanity Table with Stool Stock # PWS336158813055 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our customer service number and have your instructions and...
M A X I M U M R E C O M M E N D E D W E I G H T L O A D S MANUFACTURER: Whalen Furniture Manufacturing CATALOG: Makeup Vanity Table with Stool STOCK: PWS336158813055 MAXIMUM LOAD 45.4 kg / 100 lb MAXIMUM LOAD 6.8 kg / 15 lb MAXIMUM LOAD 99.8 kg / 220 lb...
Page 3
FURNITURE POWER DISTRIBUTION CENTER IMPORTANT SAFETY INSTRUCTIONS Carefully read all instructions installing and operating fixture IF YOU HAVE ANY QUESTIONS REGARDING THE PROPER INSTALLATION CONSULT A QUALIFIED ELECTRICIAN. TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR INJURY TO PERSONS, PLEASE FOLLOW THE NEXT: ...
Furniture Power Distribution Unit User Guide Please read this user guide before installing and using your power distribution Center. INTRODUCTION CAN ICES-003 (B)/NMB-003(B) The integrated power, USB and type C center can This Class B digital apparatus complies with Canadian connect up to two devices, such as a digital camera, ICES-003.
Page 5
Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Table Top B- Table Leg C- Mirror (Qty. 1) (Qty. 4) (Qty. 1) D- Left Support E- Right Support F- Seat (Qty.
Page 6
Assembly Instructions Pre-attached ① x 8 ② x 8 ③ x 8 DO NOT fully tighten the bolts or nuts initially until all the bolts or nuts are ready to assemble. To avoid causing damages to the thread, DO NOT over-tighten the bolts or nuts. 1.
Page 7
Assembly Instructions Pre-attached ① x 8 ② x 8 ③ x 8 4. Position the Table Top (A) upside down on a level and protective surface. 5. Remove the plastic caps from the hanger bolts of the Table Legs (B). Attach the Table Legs (B) to the corner blocks of the Table Top (A) by inserting the pre-attached hanger bolts through the drilled holes on corner blocks, and fit one Hex Nut (1), one Large Lock Washer (2) and one Large Flat Washer (3) onto each hanger bolt.
Page 8
Assembly Instructions The countersunk holes face outward and run against the outer side edges. ⑤ x 8 ⑥ x 8 ④ x 8 6. Ask for assistance to lift the unit upright and carefully position the Mirror (C) on the Table Top (A) to prevent scratching.
Page 9
Assembly Instructions Power Center 8. Simply swing two side mirrors outward.
Page 10
Assembly Instructions Tools required (not included): Phillips screwdriver, stud finder, measure tape, pencil, power drill and 1/8” drill bit. 9. Ask for assistance to position the assembled unit at the desired location and adjust the pre-attached floor levelers to level the unit against a wall. 10.
Page 11
FURNITURE TIPPING RESTRAINT YOUNG CHILDREN MAY BE INJURED BY TIPPING FURNITURE AND YOU MUST USE THIS TIPPING RESTRAINT TO ATTACH THIS UNIT TO THE WALL, TO PREVENT ACCIDENTS AND/OR INJURIES. THIS HARDWARE, MUST BE PROPERLY INSTALLED (FOLLOW ALL DIRECTIONS IN ORDER ON THIS INSTRUCTIONS), TO PROVIDE PROTECTION AGAINST THE UNEXPECTED TIPPING OF FURNITURE DUE TO IMPROPER USE.
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polishes is not necessary. Should you choose to use polishes, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. ...
Page 13
FECHA de COMPRA: Tocador para maquillaje con taburete Serie # PWS336158813055 ENSAMBLE REQUERIDO POR ADULTO Si tienen alguna pregunta acerca del ensamble o si alguna parte está faltante, no retorne esté producto a la tienda donde lo compro. Por favor llame a nuestro departamento de ayuda al cliente teniendo su instructivo y lista de partes para proveer el modelo, nombre de parte o el número de fábrica:...
Page 14
M Á X I M O P E S O R E C O M E N D A D O FABRICANTE: Whalen Furniture Manufacturing CATALOGO: Tocador para maquillaje con taburete SERIE: PWS336158813055 CARGA MÁXIMA 45.4 kg / 100 lb CARGA MÁXIMA 6.8 kg / 15 lb CARGA MÁXIMA 99.8 kg / 220 lb...
Page 15
INSTRUCCIONES DE SEGURIDAD IMPORTANTES SOBRE EL CENTRO DE DISTRIBUCION DE PODER DEL MUEBLE Lea cuidadosamente las instrucciones de instalación y operación SI TIENE DUDAS SOBRE LA INSTALACIÓN CORRECTA CONSULTE A UN ELECTRICISTA CALIFICADO. PARA REDUCIR EL RIESGO DE FUEGO, DESCARGA ELECTRICA O LESIONES A PERSONAS, POR FAVOR SIGA LO SIGUIENTE: ...
Page 16
Guía de usuario de la unidad de distribución del mueble Por favor lea esta guía de usuario antes de instalar y usar su centro de distribución de poder. CAN ICES-003 (B)/NMB-003(B) INTRODUCCIÓN El centro integrado de poder, USB tipo C puede conectar Esté...
Page 17
Lista de partes y material de ferretería Por favor lea completamente las instrucciones y verifique que estén todas las partes y partes de ferretería antes de iniciar el ensamblado. A- Tapa de la mesa B- Pata de la mesa C- Espejo (Cant.
Page 18
Instructivo de ensamble Pre-adjuntado ① x 8 ② x 8 ③ x 8 NO apriete los pernos y tuercas hasta que todos los pernos y tuercas estén listos para el ensamble. Para evitar daños a la rosca, NO sobre apriete los pernos y tuercas. 1.
Page 19
Instructivo de ensamble Pre-adjuntado ① x 8 ② x 8 ③ x 8 4. Poner la tapa de la mesa (A) boca abajo en una superficie nivelada y protegida. 5. Retirar los pernos colgantes de las patas de la mesa (B). Adjuntar las patas de la mesa (B) a los bloques esquinas de la tapa de la mesa (A) insertando los pernos colgantes pre-adjuntados a través de los bloques esquinas, y meter una llave hexagonal (1), una arandela de presión grande (2) y una arandela plana grande (3) sobre cada perno colgante.
Page 20
Instructivo de ensamble Los agujeros avellanados apuntan hacia afuera y corren conttra los bordes laterales exteriores. ⑤ x 8 ④ x 8 ⑥ x 8 6. Pedir asistencia para poner la unidad en posición vertical y poner el espejo (C) sobre la tapa de la mesa (A) para prevenir rayaduras.
Page 21
Instructivo de ensamble Centro de poder 8. Desdoblar los espejos laterales hacia afuera.
Page 22
Instructivo de ensamble Herramientas requeridas (no provistas): Desarmador estrella, buscador de vigas, lápiz, cinta métrica, taladro y broca de 1/8 pulgadas. 9. Pedir asistencia para poner la unidad ensamblada en el lugar deseado y ajustar los niveladores de piso pre adjuntados para nivelar la unidad contra la pared. 10.
Page 23
SISTEMA DE RESTRICCIÓN DE MOVIMIENTO NIÑOS PEQUEÑOS PUEDEN RESULTAR LASTIMADOS POR MUEBLES INCLINADOS Y DEBE INSTALAR EL JUEGO DE RESTRICCIÓN DE MOVIMIENTO CON LA UNIDAD EN FUNCIÓN, PARA PREVENIR LA INCLINACIÓN DE LA UNIDAD, CAUSANDO CUALQUIER ACCIDENTE O DAÑO. ESTÉ JUEGO DEBE SE INSTALADO CORRECTAMENTE (SIGA LAS DIRECCIÓN EN ORDEN DE LAS INSTRUCCIONES), PARA PROVEER PROTECCIÓN EN CONTRA DE LA INCLINACIÓN INESPERADA DEL MUEBLE DEBIDO AL USO INAPROPIADO.
Page 24
Mantenimiento y Cuidados Use una toalla suave y limpia para evitar daños y rayaduras. Uso de cera para pulir muebles no es necesario. Si desea usar cera, pruébela en un área que no sea visible para revisar su funcionamiento. ...
Need help?
Do you have a question about the PWS336158813055 and is the answer not in the manual?
Questions and answers