Warranty And After-Service - Hitachi CP-X505 User Manual – Operating Manual

Warranty And After-Service / Specification

Warranty and after-service

If a problem occurs with the equipment, first refer to the "Troubleshooting" and run
through the suggested checks. If this does not resolve the problem, please contact your
dealer or service company. They will tell you what warranty condition is applied.
Specification
Item
Product name
Panel size
Liquid
Crystal Drive system
Panel
Pixels
Lens
Lamp
Speaker
Power supply
Power consumption
Temperature range
Size
Weight (mass)
Ports
Lamp
Optional
Air filter
parts
Others
NOTE • These specifications are subject to change without notice.
68
Liquid crystal projector
.0 cm (0.79 type)
TFT active matrix
786,43 pixels (04 horizontal x 768 vertical)
Zoom lens F=.7 ~ . f=4 ~ 9 mm
85W UHB
4W x 4
AC 00-0V/5.0A, AC0-40V/.A
460W
5 ~ 35°C (Operating)
48 (W) x 39 (H) x 39 (D) mm
(Not including protruding parts)
* Please refer to the following figure.
7. kg
RGB input port
RGB .......D-sub 5pin mini x
RGB .......D-sub 5pin mini x
RGB output port
RGB OUT..D-sub 5pin mini x
Digital input port
M-D .......................... M-D x
Video input port
Y, C /P C /P .......... RCA x3
B B, R R
S-VIDEO ................S-video x
VIDEO .......................Video x
DT0077
MU0364
* Please consult your dealer.
Specification
Audio input port
AUDIO IN .......Stereo mini x
AUDIO IN .......Stereo mini x
AUDIO IN3 ................. RCA x
AUDIO IN4 ................. RCA x
Communication port
CONTROL .......... D-sub 9pin x
Other ports
NETWORK ....................RJ45 x
REMOTE CONTROL
.........................Stereo mini x