Hitachi CP-X505 User Manual – Operating Manual page 54

NETWORK Menu
NETWORK Menu (continued)
Item Description
Entering the TIME DIFFERENCE :
Use the ▲/▼ buttons to enter the
TIME DIFFERENCE.
TIME Set the same TIME DIFFERENCE
DIFFERENCE as the one set on your PC. If unsure,
consult your network administrator.
Use the ◄ button to return to the menu
after setting the TIME DIFFERENCE.
Entering DATE AND TIME :
Use the ▲/▼/◄/► buttons to enter the Year (last two digits),
Month, Date, Hour and Minute.
DATE AND TIME
• The projector will override this setting and retrieve DATE AND TIME
information from the Timeserver when SNTP is enabled. See [Date/
Time Settings] in [User's Manual - Network Functions: Configuring
and Controlling the Projector via a Web Browser] for SNTP settings.
e-SHOT display :
Use the ▲/▼ buttons to select an item and the ► or ENTER
buttons to display the image.
Image
Image
Image3
Image4
File names of registered images are
displayed by 6 characters or less.
Example: DEMONSTRATION-0
"NEW" stamp is added to the head
of line when the image is registered
newly. After the image is displayed,
IMAGE‑1
e-SHOT
"NEW" stamp will be erased.
Once an image is displayed, you can
use the ▲/▼ buttons to page through
the images. Use the ◄ or ESC buttons
to return to the menu.
Pressing the RESET button or the ► button for about 3 seconds
while an image is being displayed will display the RESET menu.
The displayed image can be deleted from the RESET menu using
the ENTER button on the remote control or the INPUT button on the
projector.
If you do not wish to delete the image use the ESC button on the remote
control or push the ◄ and INPUT buttons on the projector at the same time.
• Items with no image stored cannot be selected.
• Images can be changed using the ▲/▼ buttons while the image data downloads.
(continued on next page)
54