Easy Menu - Hitachi CP-X505 User Manual – Operating Manual

EASY Menu

EASY Menu
From the EASY MENU, items shown in the table below can
be performed.
Select an item using the ▲/▼ cursor buttons on the
projector or remote control. Then perform it according to the
following table.
Item
ASPECT
AUTO
KEYSTONE
EXECUTE
KEYSTONE
KEYSTONE
PICTURE MODE
(continued on next page)
4
Using the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE menu (29).
Using the ► button executes the auto keystone function.
See the AUTO KEYSTONE
Using the ◄/► buttons corrects the vertical keystone distortion.
See the KEYSTONE
Using the ◄/► buttons corrects the horizontal keystone distortion.
See the KEYSTONE
Using the ◄/► buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR
TEMP settings. Choose a suitable mode according to the projected
source.
NORMAL ó CINEMA ó DYNAMIC
WHITEBOARD ó BOARD(GREEN) ó BOARD(BLACK)
NORMAL
CINEMA
DYNAMIC
BOARD(BLACK)
BOARD(GREEN)
WHITEBOARD
• When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
PICTURE MODE is "CUSTOM". Please refer to the GAMMA (26)
and COLOR TEMP (27) items in PICTURE menu.
• When this function is performed, a certain extra such as a line may appear.
Description
EXECUTE item in SETUP menu (35).
item in SETUP menu (35).
item in SETUP menu (35).
COLOR TEMP
MID DEFAULT
LOW DEFAULT
HIGH DEFAULT
Hi-BRIGHT- DEFAULT
Hi-BRIGHT- DEFAULT
MID DEFAULT
GAMMA
# DEFAULT
# DEFAULT
#3 DEFAULT
#4 DEFAULT
#4 DEFAULT
#5 DEFAULT