Audio Menu - Hitachi CP-X505 User Manual – Operating Manual

AUDIO Menu

From the AUDIO menu, items shown in the table below can
be performed.
Select an item using the ▲/▼ cursor buttons on the
projector or remote control, and press the ► cursor button
on the projector or remote control, or ENTER button on
the remote control to execute the item. Then perform it
according to the following table.
NOTE • The speaker sound may distorted or the case may be trembling
when the volume is too high or treble/bass is emphasized or WOW is activated.
In that case, make the volume reduced, bass/treble low or WOW effect to be
weakend.
Item
VOLUME
TREBLE
BASS
SRS WOW
SPEAKER
AUDIO
Using the ▲/▼ buttons adjusts the volume.
High ó Low
Using the ▲/▼ buttons adjusts the treble level.
High ó Low
Using the ▲/▼ buttons adjusts the bass level.
High ó Low
Using the ▲/▼ buttons switches the mode for SRS WOW mode.
HIGH ó MID ó OFF
• SRS WOW™ accomplishes this by providing a panoramic three-
dimensional audio image that extends the sound field in both the
horizontal and vertical planes, and lowers the perceived bass
response well beyond the low frequency limitations of the drivers.
Adjust it depending on the user's preference.
Using the ▲/▼ buttons turns the speaker function on/off.
TURN ON ó TURN OFF
• When the TURN ON is selected the built-in speaker works.
Allocates the audio ports.
(1) Choose a picture input port using the ▲/▼
buttons.
RGB ó RGB ó M-D
VIDEO ó S-VIDEO ó COMPONENT
() Select the audio port to be interlocked with
the input port using the ◄/► buttons.
 ó  ó 3 ó 4 ó
When is selected to an input port, any audio ports do not work
interlocking with the input port, and any items in AUDIO menu are
invalid.
Description
AUDIO Menu
37