Mount Your Camera - TP-Link Tapo C201 User Manual

Mount Your Camera

When you finish adding your camera in the Tapo app, you can set it on a flat surface such as a table or shelf. You can also mount it on a wall
or ceiling with the provided mounting template and screws. Follow the steps below to mount your new camera or follow the setup video at
https://www.tp-link.com/support/setup-video/#cloud-cameras.
Note: Make sure you affix the camera base using screws
1. Mark Position
Place the mounting template where you
want the camera. For wall mounting, drill
two holes through two circles.
Φ=6 mm (15/64 in.)
before securing the camera.
2. Mount Base
Affix the camera base using the screws.
For wall mounting, insert two anchors
into the holes and use the screws to
affix the camera base over the anchors.
3. Secure Camera
Attach the camera on the base
and rotate to secure the camera.
6