ADVANTEST R3265A Series Quick Manual

R3265A/3271A SERIES QUICK GUIDE
For detailed information, see the Instruction Manual.
I } indicate the panel keys, and indicate the soft key menu.
Enter using the step keys, data knob, or numeric kxypad (unit lay last) for data setting.
O [wumerfcKaypadl-H GHz | | MHa | liHz or | Hz 1
• This entire description will not be repeated and will from now be refered to as [Oafo setting],
h ^SP
If you enter the numeric keypad incorrectly, press □.
ifau
Sets the center frequency. Sets the frequotcy span. Stts die reference level.
> [Data setting]
imsBrnm]
Itrjjr. -l-ij
g—p. [Data settini] /
► [Data setting]
Sets die frequency. Sets die frequency.
Pata setting]
Can be set to 0.1 to lOdB/div
in a 1, 2, 5 sequence.
'v .,: -|
AH lights reserved. ©1993 ADVANTEST CORPORATION
jcFij —
►
—
►
1,2, or OFF in
i .a.. 4.^
: The analog IF mode is automatically set when
^^thesetspani^01^or 200kH^oMTiore^^^^
Sets the sweep operation. *1
(1 : Set to digital IF when RBW is lOHz,
aOHa. or lOOi^)
(2 i Set to digital IF when RBW is lOHz
I or 30Hz.)
? (OFF 1 Set to the analog IF.)
Detennines the window position.
Can shin (he center position
CK, Y) of (he window.
Determines flw window riK. -----1 !■-- Cancels die WINDOW SWP.---I
_ , _ KW _
m .Q-^EsED-MZI-^^M
Can increase or decrease the X ^SSgSfiS
amplitude (ATQ of the vrindow.
NW
Enter 1^ shift I o I ^ WDO in • Vmi mn obtain the «ama cunan
You can r^itain the same sweep
operation as that marked with *1.
*
■
•A**' ^ ..-jwgraij
..ji u...>s..K&9
* ,1 t «* I
•/ w ..«
[Data setting]'
Specifies Che
marker point.
SAVE
—H RECAU. f —► [Data setting] —►!
V
Specifies the channel in
which data is stored.
MmM
[Data setting]
Sets the pause time.
(Enters the detection mode in which the positive / negative peak
detection is automatically selected by a measurement waveform.)
(Enters die positive peak detection mode. Enters this mode
automatically during maximum hold display.)
(Enters the negative peak detection mode. Enters this mode
automatically during minimum hold display.)
(Enters the sample detection mode. Enters this mode
automatically in the averaging mode.)
[m£nu[--»- on in [Data setiing]
Moves die
display line.
, „ "'i*
iips
-m El .OEl
Specifies the tBSBBM
channel.
i
Moves the cursor, Selects the character. numerical
value.
atemB wasssal
j Enters the title.
Set the mode to analog IF when the
B span is lOOHz. (See item
Sets the span width. |
^ ^
Selection".)
ilDVANTEST.
/