Advertisement
Quick Links
Installation and Assembly Instructions
Velocity Area Light (VALS/VALM) Series
Risk of electric shock--Disconnect power to equipment before installing or servicing.
This equipment must be installed according to all applicable codes & ordinances.
Installation and service of this equipment must be performed by qualified service personnel.
Do not install damaged equipment.
Read these instructions before installing, servicing or maintaining this equipment.
Save these instructions for maintaining and servicing.
Failure to follow instructions or altering equipment could result in damage and void warranty.
Edges may cut--wear gloves while handling or servicing this equipment.
Inspect equipment for damage from shipping and handling.
LUMINAIRE INSPECTION
Remove the luminaire and arm from the cartons and inspect for damage. Do not install a damaged luminaire or
arm.
Integral Bluetooth Motion and Photocell Sensor
Option – IMSBTL The sensor configuration app is
available for both iOS and Android devices. Scan the
QR code for your phone type and follow instructions.
For technical support contact us at controls.support@lsicorp.com or call 800.436.7800 ext. 3300
LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242
829421 Rev. 5/29/2024
Risk of fire, electric shock, injury or property damage
CAUTION
WARNING
Integral Bluetooth Motion and Photocell Sensor Option
– ALBMR
The sensor configuration app is available for iOS devices
only. Scan this QR code and follow instructions:
www.lsi-industries.com
1
Advertisement
Related Manuals for LSI V-LOCITY VALS Series
Summary of Contents for LSI V-LOCITY VALS Series
- Page 1 QR code for your phone type and follow instructions. only. Scan this QR code and follow instructions: For technical support contact us at controls.support@lsicorp.com or call 800.436.7800 ext. 3300 LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 www.lsi-industries.com 829421 Rev. 5/29/2024...
- Page 2 7. Install (2) 3/8-16 bolts provided to secure the Velocity Luminaire to the Arm (FIG 5). Tighten to 20 FT-LB. 8. Make wiring connections. 9. Close the door and tighten the screws to 20 IN-LB (FIG 6). FIG 5 FIG 6 *Wiring depicted in dotted lines LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 www.lsi-industries.com 829421 Rev. 5/29/2024...
- Page 3 12. Close the access cover with O-ring, door and beauty plate and tighten the screws to 20 IN-LB (FIG 11). FIG 11 FIG 9 *Wiring depicted in dotted lines LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 www.lsi-industries.com 829421 Rev. 5/29/2024...
- Page 4 11. Close the access cover with O-ring and beauty plate and tighten the screws to 20 IN-LB (FIG 18). FIG 17 FIG 18 *Wiring depicted in dotted lines LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 www.lsi-industries.com 829421 Rev. 5/29/2024...
- Page 5 5. Install (2) 3/8-16 bolts provided to secure the Velocity Luminaire to the Arm (FIG 22). Tighten to 20 FT-LB. 6. Close the access cover and beauty plate and tighten the screws to 20 IN-LB (FIG 23). FIG 22 FIG 23 *Wiring depicted in dotted lines LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 www.lsi-industries.com 829421 Rev. 5/29/2024...
Need help?
Do you have a question about the V-LOCITY VALS Series and is the answer not in the manual?
Questions and answers