Regulatory Information; Compliance - Planitar iGUIDE PLANIX R1 User Instruction Manual

Regulatory Information

Manufacturer: Planitar Inc.
Product Name: iGUIDE PLANIX R1
Model Number: IMS-R1

Compliance

This product has been tested and was found to comply with the following standards:
•
FCC CFR 47, PART 15, SUBPART B, Class B – Unintentional Radiators
•
ISED Canada ICES-003, Issue 7 - Innovation, Science and Economic Development Canada, Verification Authorization - Information
Technology Equipment (Including Digital Apparatus)
•
CISPR 32:2015+COR1:2016/EN55032:2015+A11:2020, Class B Multimedia Equipment - International Electrotechnical Commission
(International Special Committee on Radio Interference). Electromagnetic Compatibility of Multimedia Equipment - Emission
Requirements
•
CISPR 32:2012/EN 55032:2012+AC:2013 - Class B - Limits and methods of measurement of radio disturbance characteristics of
Information Technology Equipment
•
CISPR 35:2016/EN 55035:2017- Electromagnetic Compatibility of Multimedia equipment - Immunity Requirements
•
ETSI EN 301 489-1 V2.2.2 (2019-11) - European Telecommunications Standards Institute (ETSI) ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements; Harmonized Standard
covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of Directive
2014/30/EU
•
ETSI EN 301 489-17 V3.2.2 (2019-12) - ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17:
Specific conditions for Broadband Data Transmission Systems; Harmonized Standard covering the essential requirements of article
3.1(b) of Directive 2014/53/EU
•
IEC/EN 60825-1:2014 - Class 1 laser product.
•
CSA-C22.2 NO. 61010-1-12 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1:
General requirements - Third Edition; Update No. 2: April 2016
•
UL 61010-1 - Electrical Equipment for Measurement, Control, and Laboratory Use; Part 1: General Requirements -Third Edition;
Including Revisions through July 19, 2019
•
IEC 61010-1 - Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 1: General
requirements - Edition 3.1; Consolidated Reprint
4 / 35