Front Bezel - HP Pro 3000 SFF Maintenance And Service Manual

Front Bezel

1. Prepare the computer for disassembly
2. Remove the access panel
3. To remove the front bezel, pull up on each of the three tabs on the top of the bezel (1) to release
them, then rotate the bezel down and off the chassis (2).
Figure 7-2
To install the front bezel, reverse the removal procedure.
86 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
(Access Panel on page
Removing the Front Bezel
(Preparation for Disassembly on page
85).
84).