HP Compaq Presario,Presario 7480 Reference Manual page 75

4. In the Network window, the Configuration tab is displayed:
5.
6. Select the Identification Tab in the Network window and complete the
9-2
a. Click Add.
b. Select Client and click Add.
c. Select Microsoft.
d. Select Client for Microsoft Networks, then click OK.
e. Select File and Print Sharing..., then click in both boxes to make check
marks appear. Click OK. In the Network window, the Configuration tab is
displayed. Click Add.
In the Select Network Component Type window:
a. Click Protocol.
b. Click Add.
c. Select Microsoft.
d. Select IPX/SPX compatible Protocol.
e. Click OK.
f. Click Add.
g. Click Protocol.
h. Click Add.
i. Select Microsoft.
j. Select TCP/IP.
k. Click OK.
following steps:
a. Enter a name for the computer. This name must be unique, different from
the name of every other computer in the network. The name may contain a
maximum of 15 letters, numbers, and the following special characters:
! @ # $ % ^ & ( ) - _ ' { } ~
Do not use any blank spaces in the Computer name box.
b. Enter a Workgroup name. If you would like all computers to have access to
each other, the Workgroup name must be the same for all of the computers
on the network. The name may contain a maximum of 15 letters, numbers,
and the following special characters:
! @ # $ % ^ & ( ) - _ ' { } ~
Do not use any blank spaces in the Workgroup name box.
c. Click OK. The System Settings Change window is displayed. Click Yes to
restart your computer. The Microsoft Networking window is displayed.
Connecting Your Internet PC to a Network (available on select models only)