Table of Contents
Advertisement
Computer
Setup
Heading
Option
Post Delay Time
(in seconds)
System Keyboard
Internal Graphic
Mode Select
Quick Power On
Self Test
Boot Other Device
Boot Up NumLock
Status
Add-On ROM
Display mode
Power
ACPI Standby
management
State setup
Restore on
AC/Power loss
Resume on PME
wake on alarm
item
Service Reference Guide, d260
Sets the amount of time before the setup Utility prompt
(F10=setup) appears when the computer boots.
• None: POST Delay Time disable (Default)
• 5: POST Delay 5 seconds
• 10: POST Delay 10 seconds
• 15: POST Delay 15 seconds
• 20: POST Delay 20 seconds
Detects if a keyboard is present when the Computer boots.
Absent: keyboard not detected (Default)
Present: keyboard detected
Selects the size of memory for internal graphic adapter.
• 1MB: Share 1MB
• 8MB: Share 8MB (Default)
• 16MB: Share 16MB
Enable this item to shorten the power on testing (POST) and
have your system, start up faster. The available setting values
are: Disabled and Enabled.
With this function set to Enabled, the system will boot from some
other devices if the first/second/third boot devices failed.
This item defines if the keyboard Num Lock key is active when
your system is started.
Sets the ACPI Standby State when system goes into ACPI
standby Mode.
• S1/POS: Power on Suspend
• S3/STR: Suspend to RAM(Default)
Sets the system status after AC power loss.
• Power off: system always powers Off (default)
• Power on: system always powers
• Last state: system returns to the last state before AC power
loss.
Sets the resume on PME from soft off
• Disable: PME resume disable
• Enable: PME resume enable (Default)
377977-AA1
Setup Utilities and Diagnostics Features
Description
2–5
Advertisement
Table of Contents
