Data General DASHER D100 Field Engineering Manual page 90

Data General Corporation (DGC) has prepared this manual for use by DGC personnel and customers as a guide to the proper installation, operation, and maintenance of DGC equipment and
software. The drawings and specifications contained herein are the property of DGC and shall neither be reproduced in whole or in part without DGC's prior written approval nor be implied to
grant any license to make, use, or sell equipment manufactured in accordance herewith.
6. Make sure the communications interface and the split vbaud/printer
option on the new circuit voard are tailored correctly (See figures
3.4 and 3.54 respectively).
tne poeard to the case.
REPLACING THE CRT/YOKE ASSEMBLY
the tube and grasp it by the sides near the front.
figure 8.18).
WARNING: Do not let the CRT fall back on its neck or it may implode.
area.
DISCHARGE THE CRT as follows:
sige of the CRI.