Data General DASHER D100 Field Engineering Manual page 52

Data General Corporation (DGC) has prepared this manual for use by DGC personnel and customers as a guide to the proper installation, operation, and maintenance of DGC equipment and .
software. The drawings and specifications contained herein are the property-of DGC and shall neither be reproduced in whole or in part without DGC's prior written approval nor be ¢ implied to
- grant any license to make, use, or sell equipment manufactured in accordance herewith.
This checkout should be the last one performeds since the screen
parameters may be affected by replacement of the circuit board or the
CRT/yoke assembly.
Check the four screen parameters - widths height, bias, and focus = as
descrived below. Sefore the screen width and height can be checkea
done in several ways:
© Entering a screen full of characters via the keyboarc.