Technical Specifications; Product Components; Fast Cure User Interface - formlabs Fast Cure Manual

2.2

Technical specifications

Parameter Unit
Unit Fast Cure
Installation surface Desktop unit
Minimum dimensions for 57.9 × 60.5 × 31.0 cm | 22.8 × 23.8 × 11.8 in
convenient access (W × D × H)
Product dimensions (W × D × H) 27.5 × 31.0 × 31.0 cm | 10.8 × 11.8 × 11.8 in
Product weight 8.2 kg | 18 lb
Turntable diameter 18 cm | 7.1 in
Curing volume Cylinder 18 cm in diameter and 6.5 cm tall
Cylinder 7.1 in in diameter and 2.56 in tall
Operating temperature 5–35 ºC | 41–95 ºF
Power requirements Input: 100–240 VAC, 50–60 Hz, 5.4 A max
Maximum post-cure 160 °C | 320 °F
temperature
Light source 56 multi-directional LEDs (405 nm-LEDs)
UV LED electrical power 200 W
Connectivity USB: 2.0
USB connectivity USB (rev 2.0) B port with a USB A-B cable
Sound emission Does not exceed 79.5 dB(A).
Unit control Interactive touchscreen
Alerts Touchscreen alerts
2.3

Product components

2.3.1 Fast Cure
10
1
2 4
3
5
Display: Shows status, time, LED intensity, and preset options for configuring the Fast Cure.
1
LEDs: An array of 405 nm LEDs post-cure parts.
2
Turntable: Rotating plate ensures balanced post-curing across all exposed surfaces.
3
Door: Double walls insulate the post-cure chamber and the internal surfaces reflect light.
4
Turntable tray: Removable plate ensures balanced post-curing across all exposed surfaces.
5
2.3.2 Additional Fast Cure package components
1
Turntable tray (2x): Rotating plate ensures balanced post-curing across all exposed
1
surfaces.
Power cable: Provides power to the Fast Cure.
2
2.4

Fast Cure user interface

For detailed guidance and visual assistance, visit support.formlabs.com.
The Fast Cure display is a touchscreen interface. The touchscreen displays post-cure
information (time, LED intensity, and selected material), settings, and error messages. The
touchscreen serves as the user interface for the machine.
The home screen displays the post-cure time and LED intensity, current resin, and device status.
The following screens and options are accessible via the home screen on the Fast Cure display:
Home Select a post-curing time, LED intensity, and temperature.
Create Custom Preset Select or create a custom resin profile.
Start Start a post-cure cycle.
Pause Pause a post-cure cycle to flip the printed parts if indicated.
End cycle Finish a post-cure cycle.
2
Introduction | 11