Page 1
Assembly Instructions Ice Cream Dipping Cabinet Glass Sneeze Guard MODELS: KM-26FG, KM-49FG, KM-71FG Intended for other than household use. Unit must be kept clear of combustibles at all times. For any service-related Issues, please contact us: Phone Number: 718-576-6342 Email address: support@koolmore.com...
Page 2
1.) Install the 3 plastic rails along the sides and front of the cabinet using the small screws and metal washers. A short rail should be installed on each side, and the long rail should be installed on the front. For any service-related Issues, please contact us: Phone Number: 718-576-6342 Email address: support@koolmore.com...
Page 3
Then, attach each of the metal plates to the side glass panel using the large screws. Repeat this step on the other side of the cabinet. For any service-related Issues, please contact us: Phone Number: 718-576-6342 Email address: support@koolmore.com...
Page 4
There are two bracket mounting locations on each side; one at the top, and one at the bottom. For any service-related Issues, please contact us: Phone Number: 718-576-6342 Email address: support@koolmore.com...
Page 5
5.) Install the gasket on the top edge of the front glass panel, and place top glass panel atop the front and side panels. 6.) After finishing (4) glass panels attaching, fasten all screws. The final image is as below: For any service-related Issues, please contact us: Phone Number: 718-576-6342 Email address: support@koolmore.com...
Need help?
Do you have a question about the KM-26FG and is the answer not in the manual?
Questions and answers