To Remove A Pc Card; To Find Tested Pc Cards - HP OmniBook 2100 Reference Manual

Making Connections

To remove a PC Card

Do not remove a PC Card while the OmniBook is actively reading or writing data.
Otherwise, you could lose data or the OmniBook could stop responding. When the
card is active, the PC Card indicator appears on the status panel.
PC Card indicator
1. To remove the card, click the PC Card indicator in the taskbar, then click Stop
(for Windows 95 only). This protects your data and avoids unexpected
problems. You can restart the card by removing it, then inserting again.
2. Press the ejector button once to pop the button out.
3. Press the eject button again to eject the PC Card.
The OmniBook beeps twice when the card pops out.
4. Push in the ejector button until it is flush with OmniBook case.

To find tested PC Cards

For the latest information about compatible cards, visit our website at
http://www.hp.com/omnibook and check the Accessories section. Or contact
Hewlett-Packard as described in the Support and Service booklet.
4-16