Hardware Specifications - HP OmniBook 2100 Reference Manual

Hardware Specifications

OmniBook 2100
Size: 29.9 × 23.7 × 4.6 cm (11.75 × 9.2 × 1.8 in) closed.
Weight: 2.9 kg (6.4 lb).
OmniBook 3100
Size: 30.3 × 23.7 × 4.9 cm (11.9 × 9.2 × 1.9 in) closed.
Weight: 3.0 kg (6.7 lb).
Intel Mobile Pentium or Pentium II processor with MMX technology.
Intel sub-2V low-power processor.
512-KB burst-synchronous L2 cache.
32-bit PCI bus.
OmniBook 2100
OmniBook 3100
PCI local bus video; 128-bit NeoMagic NM 2160 (NMG4) graphics controller
with 2-MB video RAM integrated.
Rechargeable Lithium Ion or Nickel Metal Hydride battery with built-in
four-level fuel gauge.
Secondary Lithium Ion battery for use in module bay.
Advanced Power Management (APM 1.2) and ACPI 1.0 ready.
Low-battery warning.
Suspend/resume capability.
Battery life: up to 3 hours (varies with type of usage) for one battery; up to 6
hours with dual battery operation.
AC adapter 100 to 240 Vac (50 to 60 Hz) input; 19 Vdc, 3.16 A output.
4.0-, 3.2-, or 2.1-GB removable hard drive.
1.44-MB internal/external floppy drive (swap with secondary battery and other
drives below).
Removable 24 x CD-ROM drive (24 x maximum).
Optional removable Zip drive.
Optional removable DVD drive.
32-MB RAM on board.
The maximum supported amount of RAM using HP memory modules is
288 MB if your OmniBook has two expansion slots and a Pentium II processor,
192 MB is it has two expansion slots and a Pentium processor, or 160 MB if it
has one expansion slot and a Pentium processor. Check your Intel label to see
if your processor is Pentium or Pentium II.
12.1-inch SVGA active matrix (TFT) display (800 x 600 x 16M colors).
–or–
12.1-inch SVGA dual-scan (DSTN) display (800 x 600 x 16M colors).
13.3-inch XGA active-matrix (TFT) display (1024 × 768 × 64K colors).
Specifications and Regulatory Information
8-3