Pioneer DMH-WT6000NEX Quick Start Manual page 142

No Response
• This product cannot recognize the
connected USB storage device.
– Disconnect the device and replace it with
another USB storage device.
• The USB connector or USB cable has
short-circuited.
– Check that the USB connector or USB cable is
not caught in something or damaged.
• The connected USB storage device
consumes more than maximum
allowable current.
– Disconnect the USB storage device and do
not use it. Turn the ignition switch to OFF,
then to ACC or ON and then connect a
compliant USB storage device.
• The USB interface cable for iPhone has
short-circuited.
– Confirm that the USB interface cable for
iPhone or USB cable is not caught in
something or damaged.
Audio Format not supported
• This type of file is not supported on this
product.
– Select a file that can be played.
Apple CarPlay
Connection failed.
• Communication failed and the system
is trying to connect.
• Wait for a while. Then, perform the
actions below if the error message is
still displayed.
– Restart the iPhone.
– Disconnect the cable from the iPhone, and
then connect the iPhone again after a few
seconds.
– Turn the ignition switch to OFF and then to
ON.
Please attach the GPS antenna in order
to use Apple CarPlay over Wireless.
• This unit cannot properly detect the
GPS signal from the GPS antenna.
– Check the GPS antenna installation and
connection. For details about the connection
and installation, refer to the Quick start
guide.
The speed sensor is disconnected.
Please attach it.
• The speed sensor cannot detect any
signal.
– Check the speed signal cable connection. For
details about the connection, refer to the
Quick start guide.
Please attach the GPS antenna and the
speed sensor in order to use
Apple CarPlay over Wireless.
• This unit cannot detect the GPS signal
from the GPS antenna and the speed
signal from the speed sensor.
– Check the connection and installation for
both. For details about the connection and
installation, refer to the Quick start guide.
If the error message is still displayed after
performing the above action, please
contact your dealer or an authorized
Pioneer Service Station.
Android Auto
To use Android Auto, please check the
screen of your Android phone when it is
safe to do so.
• The time set in the smartphone is not
correct.
– Set the correct time.
If the error message is still displayed after
performing the above action, please
contact your dealer or an authorized
Pioneer Service Station.
Bluetooth pairing failed.
• The Bluetooth pairing failed for some
reasons.
– Pair this product with the device manually.
- 120 -