Display Release Assembly - Compaq Presario,Presario 900 Maintenance And Service Manual

7. Remove the four TM2.5 × 5.0 screws 1 that secure the
TouchPad, TouchButton board, and TouchPad bracket to the
palm rest (Figure 5-34).
8. Remove the TouchPad bracket 2, TouchButton board 3, and
TouchPad 4 from the palm rest.
Figure 5-34. Removing the TouchPad Components

5.17 Display Release Assembly

✎
Display release assemblies are available with carbon finish for
Evo Notebook N1005 models and silver finish for Presario 900
models, and are included in the Miscellaneous Plastics/Hardware
Kit, spare part number 285541-001.
1. Prepare the computer for disassembly (Section 5.3).
2. Remove the palm rest (Section 5.14).
3. Turn the palm rest bottom side up with the speaker grilles
facing forward.
Maintenance and Service Guide
Removal and Replacement Procedures
5–43