Yacht Controller OPTIMO Installer's Manual
Version for morse ke4
Hide thumbs
Also See for OPTIMO:
- Installer manual (43 pages) ,
- User manual (29 pages) ,
- Installer's manual (8 pages)
Related Manuals for Yacht Controller OPTIMO
Summary of Contents for Yacht Controller OPTIMO
- Page 1 Installer’s guide Version for Morse KE4 Version 1.4 Office - 4545 Ponce De Leon Boulevard - Coral Gables, FL 33146 Showroom - 1300 SE 17th Street - Fort Lauderdale, FL 33316 Phone: 305.667.5811 Fax: 305.663.5551 Toll Free: 888.898.8608 www.YachtController.com...
- Page 2 Thank you for your purchase of the Yacht Controller system. We are sure you will be well pleased with its operation and your wireless control of your yacht. If we can be of assistance to you at any time please do not hesitate to contact us via e mail.
-
Page 3: Before Starting The Installation
Configuration jumper Picture 1: “A” analog module and position of the configuration jumper 1. To access the electronics, remove the power supply to the Optimo receiver and, if present, disconnect all cables from the device. 2. Remove the back cover to access the electronics. - Page 4 Be careful as the colors of the wires indicated in the tables may not correspond to the ones connected to the control head. In this case, contact the Yacht Controller before proceeding with the cable connection. Incorrect connections could damage the receiver.
- Page 5 Connect the red wire to Connect the orange wire the white wire of the to the white wire of the Yacht Controller receiver, Yacht Controller receiver, and the pink wire to the and the pink wire to the yellow / green wire of the yellow / green wire of the Yacht Controller receiver.
- Page 6 Yellow / Green Pink Yellow / Green connector Port cable Starboard cable Optimo receiver Yacht Controller Yacht Controller cable cable Picture 5: Connection scheme for dual engine boats DANGER: Once finished the installation verify with very short commands of activation of the engines...
- Page 7 White Controller P / L (Port) connector Pink Yellow / Green Optimo receiver Yacht Controller cable Picture 6: Connection scheme for single engine boats DANGER: Once finished the installation verify with very short commands of activation of the engine the correct directional command.
Need help?
Do you have a question about the OPTIMO and is the answer not in the manual?
Questions and answers