Kyocera 7054ci Series Firmware Release Notes page 9

7054ci/7004i Series Firmware Release Notes
Items
18 Corrective measure for the
display of the check box for
[All select/All release]
19 Corrective measure for
F57B
20 Corrective measure for
[memory
shortage]/[freeze] error
21 Corrective measure for
F248 caused by a certain
PDF file
22 Corrective measure for the
freeze with the PCL setting
23 Corrective measure for
incorrect toner level in KFS
24 Corrective measure for the
problem that [start] button
does not work on
[KNM/aQrate]
25 Corrective measure for the
problem that the error is
not displayed on the HyPAS
application
26 Corrective measure for the
failure of the coin vender
with the HyPAS application
27 Corrective measure for the
display failure of the send
function screen registered
to One Touch Key
Corrected Contents
The check icon for [All select/All release] is moved to the center of
the column header and resized to large since it is too close to the left
and too small inside the area.
After change (correct)
When carrying out the scan operation with PDF/HCPDF file format
while [OCR Text Recognition function] is set on, system error F57B
might occur. This is corrected.
When printing a certain PDF file in duplex via AirPrint, the errors of
[memory shortage] or [freeze] might occur. This is corrected.
When printing a certain PDF using USB direct printing or AirPrint,
system error F248 might occur.
When printing with the PCL setting, the machine might freeze during
the printing operation. This is corrected.
When setting the genuine toner, the toner level is wrongly displayed
to "0%" on MyQ or KFS with NetGateway connection if the notification
process is timed out due to an error or readout process.
The job does not start even though pressing [start] button after
logging into HyPAS application [KNM/aQrate]. This is corrected this
time.
The error screen is not displayed even when the DP JAM occurs on
HyPAS application [KYOcontrol]. This is corrected.
After inserting the coin into the coin vendor with the HyPAS
application installed, the display does not change from the message
screen "Please insert the coin". This is corrected.
When registering the send function to One Touch Key while the
default screen is set to address book etc., the default screen (address
book etc.) is displayed before the registered send function screen.
This is corrected.
KYOCERA Document Solutions America, Inc.
Before change (incorrect)