Switch
To install the switch:
1.
KEEP SHAPER DISCONNECTED FROM
POWER!
2.
Slide the grommet plate, FWD/REV switch,
and magnetic switch between the motor and
the cabinet (Figure 4) and remove the grom-
met plate and switches from the cabinet.
Figure 4. Removing magnetic switch from
cabinet.
3.
Reinstall the motor cover.
4.
Install the grommet plate, as shown in Figure
5, using the screws and nuts already mount-
ed in the motor cover.
Figure 5. Securing grommet to motor cover.
G1026 Heavy-Duty Shaper
5.
Figure 6. Securing FWD/REV switch to cabinet.
6.
Grommet
Plate
Mount the FWD/REV switch to the cabinet, as
shown in Figure 6, using the screws already
mounted in the cabinet at that location.
Mount the magnetic switch to the cabinet, as
shown in Figure 7, using the screws already
mounted in the cabinet at that location.
Mag Switch
Figure 7. Securing mag switch to cabinet.
FWD/REV
Switch
-13-