Advertisement
Quick Links
LED Floodlight - Black with 2m cable
Please read these instructions carefully before use and retain for future
reference.
This floodlights must be installed by a qualified electrician in accordance with current
building and IET wiring regulations (BS7671).
IMPORTANT SAFETY INFORMATION
•
Do not use PVC cable to connect this floodlight to your wiring supply. Rubberised
cable (type H05RN-F), with three conductors of at least 1.0mm² cross-sectional
area must be used. This product must be connected to Earth.
•
The front of this floodlight is made of tempered glass, replace if cracked.
•
LED lamps are extremely bright. To avoid possible damage to the eyes, do not
stare into an LED beam.
•
In use, avoid touching any external surface of the floodlight, due to the possibility
of high temperatures.
•
Do not use near flammable materials.
•
The floodlight must be positioned so that there is at least 1m between the front of
the light unit and the surface to be illuminated.
•
It is suitable for use in an ambient temperature between -30°C and +45°C.
Model: PELL0288
1
Advertisement
Related Manuals for Pro-Elec PELL0288
Summary of Contents for Pro-Elec PELL0288
- Page 1 LED Floodlight - Black with 2m cable Model: PELL0288 Please read these instructions carefully before use and retain for future reference. This floodlights must be installed by a qualified electrician in accordance with current building and IET wiring regulations (BS7671).
- Page 2 POSITIONING • This floodlight is suitable for outdoor lighting applications, for domestic use only. • Do not use in areas where an explosive or chemical atmosphere may exist. Do not use in areas where ventilation is restricted. • It is suitable for mounting on plasterboard, wood or masonry surfaces. Highly flammable surfaces such as plastic or polystyrene must not be used.
- Page 3 When the LED lamp reaches the end of its life, the floodlight will have to be replaced. SPECIFICATION This product contains a light source of energy efficiency class F Model PELL0288 Cable length Input Voltage 220-240V AC 50Hz Luminous flux...
- Page 4 INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL & ELECTRONIC EQUIPMENT. When this product has reached the end of its life it must be treated as Waste Electrical & Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste, but kept separate for the treatment, recovery and recycling of the materials used.
Need help?
Do you have a question about the PELL0288 and is the answer not in the manual?
Questions and answers