Advertisement
Models: PELL0352, PELL0353,PELL0354
Please read these instructions carefully before use and retain for future
reference.
This floodlights must be installed by a qualified electrician in accordance with current
building and IET wiring regulations (BS7671).
IMPORTANT SAFETY INFORMATION
•
Do not use PVC cable to connect this floodlight to your wiring supply. Rubberised
cable (type H05RN-F), with three conductors of at least 1.0mm² cross-sectional
area must be used. This product must be connected to Earth.
•
The front of this floodlight is made of tempered glass, replace if cracked.
•
LED lamps are extremely bright. To avoid possible damage to the eyes, do not
stare into an LED beam.
•
In use, avoid touching any external surface of the floodlight, due to the possibility
of high temperatures.
•
Do not use near flammable materials.
•
The floodlight must be positioned so that there is at least 1m between the front of
the work light and the surface to be illuminated.
•
The floodlight has an IP rating of IP65.
•
It is suitable for use in an ambient temperature between -30°C and +45°C.
LED Floodlight
PELL0355 & PELL0356
1
Advertisement
Table of Contents
Related Manuals for Pro-Elec PELL0352
Summary of Contents for Pro-Elec PELL0352
- Page 1 LED Floodlight Models: PELL0352, PELL0353,PELL0354 PELL0355 & PELL0356 Please read these instructions carefully before use and retain for future reference. This floodlights must be installed by a qualified electrician in accordance with current building and IET wiring regulations (BS7671). IMPORTANT SAFETY INFORMATION •...
- Page 2 POSITIONING • This floodlight is suitable for outdoor lighting applications, for domestic use only. • Do not use in areas where an explosive or chemical atmosphere may exist. Do not use in areas where ventilation is restricted. • It is suitable for mounting on plasterboard, wood or masonry surfaces. Highly flammable surfaces such as plastic or polystyrene must not be used.
- Page 3 When the LED lamp reaches the end of its life, the floodlight will have to be replaced. SPECIFICATION These products contain a light source of energy efficiency class F Model PELL0352 PELL0353 PELL0354 PELL0355 PELL0356 Cable length 0.5m...
- Page 4 INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL & ELECTRONIC EQUIPMENT. When this product has reached the end of its life it must be treated as Waste Electrical & Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste, but kept separate for the treatment, recovery and recycling of the materials used.
Need help?
Do you have a question about the PELL0352 and is the answer not in the manual?
Questions and answers