Pro-Elec SR09944 Manual

LED Floodlight with Microwave Sensor
Models: SR09944, SR09945 & SR09946

IMPORTANT SAFETY INFORMATION

Please read these instructions carefully before use and retain for future
reference.
This floodlight must be installed by a qualified electrician in accordance with
current Building and IET Wiring Regulations.
• This product must be connected to Earth
• The front of this floodlight is made of tempered glass, which cannot be replaced.
Please take care while installing. If it gets damaged, the floodlight must be
disposed of and replaced.
• LED lamps are extremely bright. To avoid possible damaged to the eyes, do not
stare into an LED beam.
• In use, avoid touching any external surface of the floodlight due to the possibility of
high temperatures.
• If the mains cord lead of this floodlight is damaged, it must be replaced by the
manufacturer, its service agent or a similarly qualified person in order to avoid a
hazard.
• The floodlight can be mounted on normally flammable surfaces.
• The floodlight is suitable for use in an ambient temperature of between -30°C and
+45°C.
• Terminal block is not included. Installation may require advice from qualified
personnel.

POSITIONING

• This floodlight is suitable for outdoor lighting applications, for domestic use only.
Do not use in areas where an explosive or chemical atmosphere may exist. Do not
use in areas where ventilation is restricted.
• It is suitable for mounting on plasterboard, wood or masonry surfaces. Highly
flammable surfaces, such as polystyrene must not be used. Do not install on
damp or conductive surfaces, such as metal. It should be placed away from any
flammable materials.
.