Mb Intelligent Tweaker(M.i.t.) - Gigabyte GA-N650SLI-DS4L User Manual

2-9

MB Intelligent Tweaker(M.I.T.)

System Clock Setting
CPU Clock Ratio
******** System Voltage Optimized
System Voltage Control
DDR2 Voltage Control
NB/HT-Link Voltage
FSB Voltage
South Bridge Voltage
VCC12_DL Voltage
CPU Voltage Control
Normal CPU Vcore
: Move Enter: Select
F5: Previous Values
• Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory
and reduce the useful life of these components. This page is for advanced users only and
we recommend you not to alter the default settings to prevent system instability or other
unexpected results. (Inadequately altering the settings may result in system's failure to
boot. If this occurs, clear the CMOS values and reset the board to default values.)
• When the System Voltage Optimized item blinks in red, it is recommended that you set
the System Voltage Control item to Auto to optimize the system voltage settings.
System Clock Setting
FSB-Memory Clock Mode
x FSB-Memory Ratio
x CPU Host Frequency (Mhz)
Actual CPU Clock (Mhz)
x Memory Frequency (Mhz)
Actual Memory Clock (Mhz)
PCIe Bus, Slot 1, MHz
: Move Enter: Select
F5: Previous Values
(Note) This item is present only if you install a CPU that supports this feature.
GA-N650SLI-DS4L Motherboard
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
MB Intelligent Tweaker(M.I.T.)
[Press Enter]
[16X]
(Note)
********
[Manual]
[Normal]
[Normal]
[Normal]
[Normal]
[Normal]
[Normal]
1.40000V
+/-/PU/PD: Value
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
[Auto]
Auto
Auto
133.3
Auto
800.0
[100]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
F10: Save
System Clock Setting
133.3
800.0
F10: Save
- 52 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults