Integrated Peripherals - Gigabyte GA-N650SLI-DS4L User Manual

2-5

Integrated Peripherals

SATA-II RAID Config
On-Chip IDE Channel0
IDE DMA transfer access
On-Chip MAC Lan
Onboard LAN Boot ROM
NV Serial-ATA Controller
IDE Prefetch Mode
On-Chip USB
USB Keyboard Support
USB Mouse Support
Onboard Audio Function
SMART LAN
Legacy USB storage detect
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
: Move Enter: Select
F5: Previous Values
SATA-II RAID Config
SATA-II RAID function
x SATA-II 1 Primary RAID
x SATA-II 1 Secondary RAID
x SATA-II 2 Primary RAID
x SATA-II 2 Secondary RAID
: Move Enter: Select
F5: Previous Values
SATA-II RAID function
Enables or disables RAID for the integrated SATA 3Gb/s controllers. Enabled allows you to
configure RAID for individual SATA channel. (Default: Enabled)
SATA-II 1 Primary RAID
Enables or disables RAID for the first channel of the first integrated SATA 3Gb/s controller.
(Default: Enabled)
SATA-II 1 Secondary RAID
Enables or disables RAID for the second channel of the first integrated SATA 3Gb/s controller.
(Default: Enabled)
SATA-II 2 Primary RAID
Enables or disables RAID for the first channel of the second integrated SATA 3Gb/s controller.
(Default: Enabled)
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
SATA-II RAID Config
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Press Enter]
[Enabled]
[Enabled]
[Auto]
[Disabled]
[All Enabled]
[Enabled]
[V1.1+V2.0]
[Disabled]
[Disabled]
[Auto]
[Press Enter]
[Enabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
3
F10: Save
[Disabled]
Enabled
Enabled
Enabled
Enabled
F10: Save
- 43 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup