Integrated Peripherals - Gigabyte GA-MA790FXT-UD5P User Manual

2-6

Integrated Peripherals

OnChip IDE Channel
OnChip SATA Type
x OnChip SATA Port4/5 Type
Onboard SATA/IDE Device
Onboard SATA/IDE Ctrl Mode
 Smart Backup
Onboard Audio Function
 Onboard LAN device
Onboard 1394 Function
OnChip USB Controller
USB EHCI Controller
USB Keyboard Support
USB Mouse Support
Legacy USB storage detect
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
: Move
Enter: Select
F5: Previous Values
OnChip IDE Channel
Enables or disables the integrated IDE controller. (Default: Enabled)
OnChip SATA Type (AMD SB750 South Bridge, SATA2_0~SATA2_3 connectors)
Configures the operating mode of the integrated SATA2_0~SATA2_3 controller.
Native IDE
RAID
AHCI
OnChip SATA Port4/5 Type (SATA2_4/SATA2_5 connectors)
This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the
operating mode of the integrated SATA2_4/SATA2_5 connectors.
IDE
As SATA Type
Onboard SATA/IDE Device (GIGABYTE SATA2 Chip, GSATA2_0~3 connectors)
Enables or disables the SATA controller integrated in the GIGABYTE SATA 2 chip. (Default:
Enabled)
Onboard SATA/IDE Ctrl Mode (GIGABYTE SATA2 Chip, GSATA2_0~3 connectors)
Allows you to decide whether to configure the SATA controller to AHCI mode.
IDE
AHCI
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Allows the SATA controller to operate in Native IDE mode. (Default)
Enable Native IDE mode if you wish to install operating systems that
support Native mode.
Enables RAID for the SATA controller.
Configures the SATA controller to AHCI mode. Advanced Host Controller
Interface (AHCI) is an interface specification that allows the storage driver to
enable advanced Serial ATA features such as Native Command Queuing
and hot plug.
Disables RAID for the SATA controller and configures the SATA controller to
PATA mode. (Default)
The mode depends on the OnChip SATA Type settings.
Configures the SATA controller to PATA mode. (Default)
Configures the SATA controller to AHCI mode.
[Enabled]
[Native IDE]
IDE
[Enabled]
[IDE]
[Press Enter]
[Enabled]
[Press Enter]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
3
F10: Save
- 49 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup