Mb Intelligent Tweaker(M.i.t.) - Gigabyte GA-946GZ-DS3 User Manual

2-7

MB Intelligent Tweaker(M.I.T.)

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Robust Graphics Booster
CPU Clock Ratio
(Note)
CPU Host Clock Control
x CPU Host Frequency (Mhz)
PCI Experss Frequency (Mhz)
C.I.A. 2
System Memory Multiplier
Memory Frequency (Mhz)
DDR2 OverVoltage Control
PCI-E OverVoltage Control
FSB OverVoltage Control
(G)MCH OverVoltage Control
CPU Voltage Control
Normal CPU Vcore
: Move Enter: Select
F5: Previous Values
Incorrectly using these features may result in system instability or corruption.
Doing a overclock or overvoltage on CPU, chipsets and memory modules may result in
damages or shortened life expectancy to these components.
Please be aware that the M.I.T. menu items are for power users only.
Robust Graphics Booster
Select the options can enhance the VGA graphics card bandwidth to get higher performance.
Auto Set Robust Graphics Booster to Auto. (Default value)
Fast Set Robust Graphics Booster to Fast.
Turbo Set Robust Graphics Booster to Turbo.
CPU Clock Ratio
(Note)
This setup option will automatically assign by CPU detection.
The option will display "Locked" and read only if the CPU ratio is not changeable.
CPU Host Clock Control
Please note that if your system is overclocked and cannot restart, please wait 20secs.
for automatic system restart or clear the CMOS setup data and perform a safe restart.
Disabled Disable CPU Host Clock Control. (Default value)
Enabled Enable CPU Host Clock Control.
CPU Host Frequency (Mhz)
100 ~ 700 Set CPU Host Frequency from 100 MHz to 700 MHz.
If you use a 533 MHz FSB processor, set "CPU Host Frequency" to 133 MHz.
If you use a 800 MHz FSB processor, set "CPU Host Frequency" to 200 MHz.
If you use a 1066 MHz FSB processor, set "CPU Host Frequency" to 266 MHz.
Incorrect using it may cause your system broken. For power End-User use only!
(Note) This item will show up when you install a processor which supports this function.
GA-946GZ-DS3 (rev. 2.0) Motherboard
MB Intelligent Tweaker(M.I.T.)
[Auto]
[18X]
[Disabled]
200
Auto
[Disabled]
[Auto]
533
[Normal]
[Normal]
[Normal]
[Normal]
[Normal]
1.3875V
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 44 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults