Power Management Setup - Gigabyte GA-8IPE1000MK User Manual

Power Management Setup

CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
ACPI Suspend Type
Power LED in S1 state
Off by Power button
PME Event Wake Up
ModemRingOn/WakeOnLan
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
Power On by Mouse
Power On by Keyboard
x KB Power ON Password
AC BACK Function
: Move Enter: Select
F5: Previous Values
ACPI Suspend Type
S1(POS) Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
S3(STR) Set ACPI suspend type to S3/STR(Suspend To RAM).
Power LED in S1 state
Blinking In standby mode(S1), power LED will blink. (Default Value)
Dual/OFF In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
Off by Power button
Instant-off Press power button then Power off instantly. (Default value)
Delay 4 Sec. Press power button 4 sec. to Power off. Enter suspend if button is pressed
less than 4 sec.
PME Event Wake Up
Disabled Disable this function.
Enabled Enable PME Event Wake up. (Default Value)
GA-8IPE1000MK(rev. 2.0) Motherboard
Power Management Setup
[S1(POS)]
[Blinking]
[Instant-Off]
[Enabled]
[Enabled]
[Disabled]
Everyday
0 : 0 : 0
[Disabled]
[Disabled]
Enter
[Soft-Off]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 46 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults