Gigabyte GA-8I945P-G-RH User Manual page 71

STEP 2:
In the Audio Control Panel, click the Audio I/O tab. In
the upper left list, click 8CH Speaker.
STEP 3:
After plugging in 8-channel speakers to the rear
speaker jacks, a small window will pop up and ask
you what type of equipment is connected. Choose a
device depending on the type of speaker connected
(8-channel audio consists of Front Speaker Out (Line
Out), Rear Speaker Out, Center/Subwoofer Speaker
Out, and Side Speaker Out) then click OK. The 8-
channel audio setup is completed.
Sound Effect Configuration:
At the Sound Effect menu, users can adjust sound
option settings as desired.
AC'97 Audio Configuration:
To enable the front panel audio connector to support
AC97 Audio mode, go to the Audio Control Panel and
click the Audio I/O tab. In the ANALOG area, click
the Tool icon and then select the Disable front panel
jack detection check box. This action completes the
AC'97 Audio configuration.
- 71 - Appendix