Gigabyte GA-8I945G Pro User Manual page 37

SATA RAID / AHCI Mode
RAID
AHCI
Disabled
On-Chip SATA Mode
Disabled
Auto
Combined
Enhanced
Non-Combined
PATA IDE Set to
Ch.1 Master/Slave
Ch.0 Master/Slave
SATA Port 0/2 Set to
This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".
If PATA IDE were set to Ch. 1 Master/Slave,this function will auto set to Ch. 0 Master/Slave.
SATA Port 1/3 Set to
This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".
If PATA IDE were set to Ch. 0 Master/Slave,this function will auto set to Ch. 1 Master/Slave.
USB Controller
Enabled
Disabled
USB 2.0 Controller
Disable this function if you are not using onboard USB 2.0 feature.
Enabled
Disabled
USB Keyboard Support
Enabled
Disabled
USB Mouse Support
Enabled
Disabled
Azalia Codec
Auto
Disabled
Only for GA-8I945G Pro.
Set the onboard SATA controller to RAID mode. (Default value)
Set the onboard SATA controller to AHCI mode. Advanced Host
Controller Interface (AHCI) is an interface specification that allows the
storage driver to enable advanced Serial ATA features such as Native
Command Queuing and hot plug. For more details about AHCI, please
visit Intel's website.
Set the onboard SATA controller to IDE mode.
Disable this function.
BIOS will auto detect. (Default value)
Set On-Chip SATA mode to Combined, you can use up to 4 HDDs on
the motherboard; 2 for SATA and the other for PATA IDE.
Set On-Chip SATA mode to Enhanced, the motherboard allows up to 6
HDDs to use.
Set On-Chip SATA mode to Non-Combined, SATA will be simulated to
PATA mode.
Set PATA IDE to Ch. 1 Master/Slave. (Default value)
Set PATA IDE to Ch. 0 Master/Slave.
Enable USB Controller. (Default value)
Disable USB Controller.
Enable USB 2.0 Controller. (Default value)
Disable USB 2.0 Controller.
Enable USB Keyboard Support.
Disable USB Keyboard Support. (Default value)
Enable USB Mouse Support.
Disable USB Mouse Support. (Default value)
Auto detect Azalia audio function. (Default value)
Disable Azalia audio function.
- 37 - BIOS Setup