Feature Summary - Gigabyte GA-8I945G Pro User Manual

1-2

Feature Summary

CPU
Chipset
Memory
Slots
IDE Connections
FDD Connections
Onboard SATA 3Gb/s
Peripherals
Onboard LAN
(Note 1) For further CPU support information, please go to GIGABYTE's website.
(Note 2) Due to standard PC architecture, a certain amount of memory is reserved for system usage and
therefore the actual memory size is less than the stated amount.
For example, 4 GB of memory size will instead be shown as 3.xxGB memory during system startup.
(Note 3) To use a DDRII 667 memory module on the motherboard, you must install an 800/1066MHz FSB
processor .
Only for GA-8I945G Pro.
Only for GA-8I945G.
GA-8I945G Pro/GA-8I945G Motherboard
Supports Intel Pentium D / Pentium
® ®
Supports 1066/800/533MHz FSB
L2 cache varies with CPU
Northbridge: Intel 945G Express Chipset
®
Southbridge: Intel ICH7R / ICH7
®
Supported on the Win 2000/XP operating systems
4 DDR II DIMM memory slots (supports up to 4GB memory)
Supports 1.8V DDR II DIMM
Supports dual channel DDR II 667
1 PCI Express x 16 slot
2 PCI Express x 1 slot
3 PCI slots
1 IDE connection (UDMA 33/ATA 66/ATA 100), allows connection of 2
IDE devices(IDE1)
- Supported on the Win 2000/XP operating systems
2 IDE connection (UDMA 33/ATA 66/ATA 100/ATA 133), compatible with
RAID, allows connection of 4 IDE devices(IDE2,IDE3)
1 FDD connection, allows connection of 2 FDD devices
4 SATA 3Gb/s connections
Supported on the Win 2000/XP operating systems
1 parallel port supporting Normal/EPP/ECP mode
1 VGA port, onboard COMA connection
8 USB 2.0/1.1 ports (rear x 4, front x 4 via cable)
3 IEEE1394b ports (requires cable)
1 front audio connector
1 PS/2 keyboard port
1 PS/2 mouse port
Onboard Broadcom 5789 chip (10/100/1000 Mbit)
1 RJ 45 port
Supported on the Win 2000/XP operating systems
- 10 -
4 LGA775 CPU
® (Note 1)
(Note 2)
/533/400 DIMM
(Note 3)