Memory Card Reader; Modem (Cable Or Dsl); Modem (Dial-Up) - Gateway P-6831 Reference Manual

You see a "Not enough memory" error message
•

Memory card reader

Drive letter for the memory card slot does not appear in
the My Computer window
•

Modem (cable or DSL)

The modem does not connect
•
•

Modem (dial-up)

Your modem does not dial or does not connect
•
•
•
•
•
www.gateway.com
Close all programs, then restart your notebook.
Reboot your notebook.
Make sure that the modem cable is plugged into the
Ethernet network jack and not the modem jack. For the
location of your network jack, see
See the documentation that came with your modem for
additional troubleshooting information.
Make sure that the modem cable is plugged into the
optional modem jack and not the Ethernet network jack.
For the location of your modem jack, see
page 9.
Make sure that your notebook is connected to the
telephone line and the telephone line has a dial tone.
Make sure that the modem cable is less than 6 feet
(1.8 meters) long.
Remove any line splitters or surge protectors from your
telephone line, then check for a dial tone by plugging a
working telephone into the telephone wall jack.
If you have additional telephone services such as call
waiting, call messaging, or voice mail, make sure that all
messages are cleared and call waiting is disabled before
using the modem. Contact your telephone service to get
the correct code to temporarily disable the service. Also
make sure that the modem dialing properties are set
appropriately.
Help
For more information about dialing properties, click Start, then
click Help and Support. Type the keyword dialing in the Search Help
box, then press E .
NTER
"Right" on page 8.
"Back" on
125