Motorola SRX 2200 3.5 User Manual
Motorola SRX 2200 3.5 User Manual

Motorola SRX 2200 3.5 User Manual

Apx two-way radios
Hide thumbs Also See for SRX 2200 3.5:
Table of Contents

Advertisement

Quick Links

APX TWO-WAY RADIOS
SRX 2200 Model 3.5 User
Guide
*68012005051*
OCTOBER 2024
68012005051-GC
©
2024 Motorola Solutions, Inc. All Rights Reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SRX 2200 3.5 and is the answer not in the manual?

Questions and answers

Summary of Contents for Motorola SRX 2200 3.5

  • Page 1 APX TWO-WAY RADIOS SRX 2200 Model 3.5 User Guide *68012005051* OCTOBER 2024 68012005051-GC © 2024 Motorola Solutions, Inc. All Rights Reserved.
  • Page 2: Intellectual Property And Regulatory Notices

    License Rights The purchase of Motorola Solutions products shall not be deemed to grant either directly or by implication, estoppel or otherwise, any license under the copyrights, patents or patent applications of Motorola Solutions, except for the normal nonexclusive, royalty-free license to use that arises by operation of law in the sale of a product.
  • Page 3: Table Of Contents

    68012005051-GC Contents Contents Intellectual Property and Regulatory Notices..............2 List of Tables........................12 Software Version........................13 Chapter 1: Read Me First....................14 1.1 Notations Used in This Manual......................14 1.2 Radio Care............................14 1.2.1 Materials for Washing the Radio..................16 1.2.1.1 Washing The Radio....................16 1.2.1.2 Washing the Battery.....................
  • Page 4 68012005051-GC Contents 4.3 Status Icons............................. 33 4.4 TMS Status Icons..........................37 4.5 Call Type Icons..........................38 4.6 Intelligent Lighting Indicators ......................38 4.7 Alert Tones ............................39 4.8 Phone Call Displays and Alerts......................41 4.9 Display Color Change On Channel....................42 Chapter 5: General Radio Operation................43 5.1 Selecting a Zone..........................
  • Page 5 68012005051-GC Contents 7.1.1 Selective Call (ASTRO Conventional Only)............... 54 7.1.1.1 Receiving a Selective Call..................54 7.1.1.2 Making a Selective Call..................54 7.1.2 Talkgroup Call Feature (Conventional Only)..............55 7.1.2.1 Selecting a Talkgroup................... 55 7.1.3 Sending a Status Call......................55 7.1.4 Making Priority Dispatch Calls................... 56 7.1.5 Dynamic Regrouping (Trunking Only) ................
  • Page 6 68012005051-GC Contents 7.5.2 Making a Dynamic Priority Change (Conventional Scan Only)..........69 7.5.3 Deleting a Nuisance Channel.....................69 7.5.4 Restoring a Nuisance Channel..................69 7.6 Call Alert Paging..........................70 7.6.1 Receiving a Call Alert Page....................70 7.6.2 Sending a Call Alert Page....................70 7.7 Recent Calls.............................71 7.7.1 Viewing Recent Calls......................
  • Page 7 68012005051-GC Contents 7.13 Automatic Registration Service......................84 7.13.1 Selecting or Changing the ARS Mode................84 7.13.2 User Login Feature......................85 7.13.2.1 Logging In as a User..................85 7.13.2.2 Logging Out......................86 7.14 Text Messaging Service......................... 86 7.14.1 Accessing the Messaging Features................. 87 7.14.2 Composing and Sending a New Text Message...............
  • Page 8 68012005051-GC Contents 7.16.3.7 MDC OTAR (Conventional Only)..............102 7.16.3.8 Infinite UKEK Retention..................102 7.16.3.9 Hear Clear......................102 7.17 Radio Lock........................... 102 7.17.1 Enabling or Disabling Radio Lock (Secure Radios Only)..........103 7.17.2 Changing the Radio Lock Password................103 7.17.3 Changing the Tactical Inhibit Password................. 104 7.18 Radio Stun and Kill........................
  • Page 9 7.23 Mission Critical Wireless Bluetooth ® Wireless Technology ............118 7.23.1 Pairing with Low Frequency-Motorola Proximity Pairing (LF-MPP) Feature....118 7.23.2 PIN Authentication in Pairing..................119 7.23.2.1 Pairing the Authentication PIN when Receiving a Pairing Request....119 7.23.2.2 Pairing the Authentication PIN with the Generated Numeric PIN.....120 7.23.3 Viewing and Clearing the Bluetooth Device Information..........
  • Page 10 68012005051-GC Contents 7.28.5 Enabling and Disabling the Radio Alias................. 133 7.28.6 Selecting the Audio Speaker..................134 7.28.7 Controlling the Display Backlight..................134 7.28.8 Setting Up the Radio Display and Visual Indicators to Suit Night Vision Goggles..135 7.28.9 Locking and Unlocking the Keypad and Controls............136 7.28.10 Turning the Controls and Keypad Buttons Tones On or Off.........
  • Page 11 Declaration of Compliance for the Use of Distress and Safety Frequencies........155 Technical Parameters for Interfacing External Data Sources.............. 155 Limited Warranty......................156 MOTOROLA SOLUTIONS COMMUNICATION PRODUCTS..............156 I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:............156 II. GENERAL PROVISIONS:....................... 157 III. STATE LAW RIGHTS:........................157 IV.
  • Page 12: List Of Tables

    68012005051-GC List of Tables List of Tables Table 1: Text Entry Modes..........................26 Table 2: Keypad Characters..........................26 Table 3: LED Indications........................... 33 Table 4: TMS Status Icons..........................37 Table 5: Call Type Icons............................38 Table 6: MPL Selection Mode........................... 61 Table 7: Emergency Operation Scenarios......................76 Table 8: Parameter Editing Keys........................
  • Page 13: Software Version

    68012005051-GC Software Version Software Version All the features described in the following sections are supported by the software version R34.00.00 or later. Accessing the Radio Information on page 141 to determine the software version of your radio. Contact your system administrator for more details of all the supported features.
  • Page 14: Chapter 1: Read Me First

    68012005051-GC Chapter 1: Read Me First Chapter 1 Read Me First This User Guide covers the basic operation of the radio. However, your dealer or system administrator may have customized your radio for your specific needs. Check with your dealer or system administrator for more information.
  • Page 15 Elastomer seals used in portable radios age with time and environmental exposure. To ensure the waterseal integrity of the radio, Motorola Solutions recommends that radios be checked annually as a preventive measure. The disassembly, test, and reassembly procedures along with necessary test equipment are available in the Service Manual.
  • Page 16: Materials For Washing The Radio

    68012005051-GC Chapter 1: Read Me First 1.2.1 Materials for Washing the Radio Prerequisites: Prepare the following materials, apparatus, or equipment before you begin washing the radio and its parts. ● A bucket of tap water filled up to at least 2 inches higher than the height of the radio. ●...
  • Page 17 68012005051-GC Chapter 1: Read Me First 3. Dip the radio completely into the detergent solution and repeat turning action for both knobs, 3- Position A/B/C and the Secure Switch. 4. Lightly scrub the plastic area (front, back, bottom, top and side planes) of the radio with the small brush.Take extra care around the Speaker Grill and Microphone port openings.
  • Page 18: Washing The Battery

    68012005051-GC Chapter 1: Read Me First 8. Shake off excess water and pat dry the radio with a dry towel. Take extra care to tap/shake out any trapped water from the speaker grill area. 1.2.1.2 Washing the Battery Procedure: 1. Rinse the battery under running water to remove any excess debris. 2.
  • Page 19: Washing The Universal Connector Cover

    68012005051-GC Chapter 1: Read Me First 1.2.1.3 Washing the Universal Connector Cover Procedure: 1. Dip the universal connector cover into tap water followed by the detergent solution. 2. Use your thumb or finger to lightly rub clean the rubber seal. 3.
  • Page 20: Radio Service And Repair

    4. Ensure that no water remains entrapped near the connectors, cracks, or crevices. 1.2.3 Radio Service and Repair Proper repair and maintenance procedures ensure efficient operation and long-life of this radio. A Motorola Solutions maintenance agreement provides expert service to keep the radio and all other communication equipment in perfect operating condition.
  • Page 21: Chapter 2: Getting Started

    Do not discard batteries in a fire. When and where to use: Motorola Solutions-approved battery shipped with your radio is uncharged. Prior to using a new battery, charge it for a minimum of 16 hours to ensure optimum capacity and performance. For a...
  • Page 22: Attaching The Antenna

    68012005051-GC Chapter 2: Getting Started Attaching the Antenna Prerequisites: Ensure the radio is turned off before attaching the antenna. Procedure: 1. Set the antenna in the receptacle. 2. Turn the antenna clockwise to attach to the radio. 3. To remove the antenna, turn the antenna counterclockwise. NOTE: When removing the antenna, ensure that the radio is turned off.
  • Page 23: Using The Carry Holder

    68012005051-GC Chapter 2: Getting Started Using the Carry Holder Procedure: 1. Position the radio within the carry holder with the main speaker facing outward. 2. Slide the radio down into the carry holder until it clicks in place. 3. To remove the radio from the carry holder, place the tip of your fingers on the ledge of the carry holder. 4.
  • Page 24: Chapter 3: Radio Controls

    68012005051-GC Chapter 3: Radio Controls Chapter 3 Radio Controls This chapter explains the buttons and functions to control the radio. Radio Parts and Controls Antenna...
  • Page 25 68012005051-GC Chapter 3: Radio Controls LED Indicator Top (Orange) Button This button is usually programmed as the Emergency button. Microphone Accessory Connector Home Button Press to return to the Home screen. 4-Way Navigation Buttons Use these buttons for list scrolling and navigating around the menu hierarchy. Battery Latch Keypad Use the keypad to enter alphanumeric characters for dialing, contact entries, and text...
  • Page 26: Text Entry Icons

    68012005051-GC Chapter 3: Radio Controls Bluetooth Pairing Location Indicator Main Speaker Microphone Top Display 16-Position Select Knob This knob is usually programmed for channel selection. Text Entry Icons This feature only supports Model 3.5. Your radio uses icons to indicate the selected text entry mode. Table 1: Text Entry Modes Icon Description...
  • Page 27: Programmable Features

    68012005051-GC Chapter 3: Radio Controls Mode Output Uppercase D E F Lowercase d e f Hexadecimal 3 D E F 4 key Numeric Uppercase G H I Lowercase g h i 5 key Numeric Uppercase J K L Lowercase j k l 6 key Numeric Uppercase...
  • Page 28 68012005051-GC Chapter 3: Radio Controls Bluetooth Configuration Allows you to access the Bluetooth menu. Bluetooth Audio Reroute Toggles the audio route between the radio speaker or the Remote Speaker Microphone and the Bluetooth headset. Bluetooth Headset PTT Keys up the Bluetooth Headset microphone. Bluetooth Data Devices Pairs your radio with other data devices for data transfer.
  • Page 29 68012005051-GC Chapter 3: Radio Controls Message Allows you to access the message list. Mode Select (MS01– MS13) Long press – Saves the current zone and channel to one of the Mode Select menus when the Preconfigurable Preset Zone and Channel field is enabled. Short press –...
  • Page 30: Assignable Settings Or Utility Functions

    68012005051-GC Chapter 3: Radio Controls Selective Call (Conventional Only) Calls an assigned radio. Site Display/Search (Trunking Only) Short press – Displays the current site ID and Received Signal Strength Indicator (RSSI) value. Long press – Performs site search for Automatic Multiple Site Select (AMSS) or SmartZone operation (long press).
  • Page 31: Chapter 4: Status Indicators

    68012005051-GC Chapter 4: Status Indicators Chapter 4 Status Indicators This section explains the status indicators of the radio. Battery Charge Status Your radio indicates the battery charge status through LED, sounds, and the battery icon on the display. You can also check the battery charge status by using the menu entry. Battery Protection is activated when the battery is low or operating in extremely low temperatures to extend radio communication.
  • Page 32: Accessing The Battery Info Screen

    68012005051-GC Chapter 4: Status Indicators Gauge Battery Charge 11% to 25% Top Display: 10% or less (The gauge begins blinking at 10%) Top Display: 4.1.2 Accessing the Battery Info Screen This feature displays the current capacity and charges cycles of your battery when an IMPRES battery is powering your radio.
  • Page 33: Led Indications

    68012005051-GC Chapter 4: Status Indicators ● The red LED blinks continuously. NOTE: The radio does not display any indication when the radio is connected to the charger, the radio and battery match, or when the radio certification type is configured as None in Customer Programming Software (CPS).
  • Page 34 68012005051-GC Chapter 4: Status Indicators Icon Description The radio is transmitting a call or data. Top Display: The radio received an Individual Call. For IMPRES battery operation only – the icon shown indicates the charge remaining in the battery. For all battery operation – the icon blinks when the battery is low. Top Display: The number of bars represents the received signal strength of the current site in trunking mode.
  • Page 35 68012005051-GC Chapter 4: Status Indicators Icon Description Blinking dot The radio detects activity on the designated Priority-One channel. Top Display: Steady dot The radio detects activity on the designated Priority-Two channel. Top Display: On steady The radio is in View mode Blinking The radio is in Program mode.
  • Page 36 68012005051-GC Chapter 4: Status Indicators Icon Description Clear operation. Blinking Receiving an encrypted voice call. The radio is operating in an Advanced Encryption Standard (AES) secure chan- nel. The AES operation is cleared. Blinking The radio is receiving an AES-encrypted voice call. The Global Position System (GPS) feature is enabled, and the signal is available.
  • Page 37: Tms Status Icons

    68012005051-GC Chapter 4: Status Indicators Icon Description The radio is transmitting the broadband signal. The radio is receiving and transmitting the broadband signal. The ARS user logged on successfully with the broadband system. The radio is receiving a broadband signal with the ARS user logged on. The radio is transmitting a broadband signal with the ARS user logged on.
  • Page 38: Call Type Icons

    68012005051-GC Chapter 4: Status Indicators Icon Description The message is urgent and requires a reply. The index of the current message that you are viewing. Call Type Icons This feature only supports Model 3.5 and Model 2.5. Call icons appear on the radio display when you make or receive a call, or view selected call lists. The call icons indicate the call types associated with an alias or ID.
  • Page 39: Alert Tones

    68012005051-GC Chapter 4: Status Indicators display backlight color and the alert text background color of the radio to help signal that a radio event has occurred. Backlight and Notification When Bar Color Orange Emergency Alerts The radio initiates an emergency alarm or call. The radio receives an emergency alarm or call.
  • Page 40 68012005051-GC Chapter 4: Status Indicators You Hear Tone Name Heard Out of Range (When PTT button is pressed) the radio is out of range of the system. Invalid Mode When radio is on an unpreprogrammed channel. A Group of Busy When system is busy.
  • Page 41: Phone Call Displays And Alerts

    68012005051-GC Chapter 4: Status Indicators You Hear Tone Name Heard Unique, Priority Status When a priority message is received. High-Pitched Chirp Incremental- Bluetooth Paired When Bluetooth accessory is paired with the radio. Pitched Bluetooth Connected When Bluetooth accessory is connected to the radio. Tone Decremen- Bluetooth Unpaired...
  • Page 42: Display Color Change On Channel

    68012005051-GC Chapter 4: Status Indicators Display Color Change On Channel This feature provides visual channel identification for users to have a quick visual recognition on a particular channel. Your radio must be programmed to allow you to use this feature. For Model 3.5 and Model 2.5, when changing channels, the radio backlight on top display, radio keypad, and accessories (DRSM or keypad Mic) changes to the programmed color.
  • Page 43: Chapter 5: General Radio Operation

    68012005051-GC Chapter 5: General Radio Operation Chapter 5 General Radio Operation This chapter explains the general operations of your radio. Selecting a Zone When and where to use: A zone is a group of channels. Do one of the following to select a radio channel. You can use these options interchangeably depending on your preference and the programmed functions.
  • Page 44: Selecting A Channel By Using Channel Search Button

    68012005051-GC Chapter 5: General Radio Operation b. Press the Menu Select button directly below Chan . to the required channel or use the keypad to enter the channel number. If the channel number entered is unprogrammed, the display shows Invalid entry. Repeat this step.
  • Page 45: Saving A Zone And A Channel To A Softkey

    68012005051-GC Chapter 5: General Radio Operation Select menu saves the current zone and channel to one of the Mode Select menus. The radio displays MS0x is programmed. NOTE: Your radio must be programmed for you to use this feature. 5.4.1 Saving a Zone and a Channel to a Softkey Five softkeys are available for you to save the frequently used zone and channel.
  • Page 46: Receiving And Responding To A Talkgroup Call

    68012005051-GC Chapter 5: General Radio Operation ● In trunking mode, there is no LED indication when the radio receives a transmission. ● If the radio is receiving a secure transmission, the LED blinks yellow. 5.5.1 Receiving and Responding to a Talkgroup Call When and where to use: When you receive a talkgroup call (while on the Home screen) the radio displays the following depending on the system your radio is configured to: ●...
  • Page 47: Methods To Make A Radio Call

    68012005051-GC Chapter 5: General Radio Operation When and where to use: When you receive a Telephone Call, you hear a telephone-type ringing and the LED blinks green. The backlight of the screen and the bar turns green.The display shows Phone call and the call received icon blinks.
  • Page 48: Making An Enhanced Private Call (Trunking Only)

    68012005051-GC Chapter 5: General Radio Operation ● To access this feature using a preprogrammed button, press the preprogrammed Private Call button to dial the preprogrammed ID (number) and initiate the Private Call. Proceed to step ● or to Call , and press the Menu Select button directly below Call . The display shows the last transmitted or received ID.
  • Page 49: Making A Telephone Call (Trunking Only)

    68012005051-GC Chapter 5: General Radio Operation If no acknowledgment is received, the display shows No acknowledge. If the target radio does not respond before the time out, the display shows No answer. 5. Press and hold the PTT button to talk. Release the PTT button to listen. 6.
  • Page 50: Monitor Feature

    68012005051-GC Chapter 5: General Radio Operation Monitor Feature The monitor feature ensures that a channel is clear before transmitting. The lack of static on a digital channel when you switch from analog to digital radios is not an indication that the radio is malfunctioning.
  • Page 51: Monitoring Conventional Mode

    68012005051-GC Chapter 5: General Radio Operation 5.8.2 Monitoring Conventional Mode This feature allows you to monitor channel traffic on conventional channels by defeating the coded squelch. Thus, you can listen to another active user on the channel. This way, you may be prevented from taking over the conversation of another user.
  • Page 52: Chapter 6: Additional Performance Enhancement

    Data (IV&D) bearer service. This bridges the communication between the radio and the Customer Enterprise Network. SecureNet SecureNet allows you to perform secured communications on an Analog or Motorola Data Communication (MDC) channel. The MDC Over-the-Air Rekeying (OTAR) feature allows you to perform OTAR activities on an MDC channel.
  • Page 53: P25 Digital Vehicular Repeater System

    P25 Digital Vehicular Repeater System Motorola Solutions offers an MSI Certified APX compatible, third party, P25 Digital Vehicular Repeater System (DVRS). This provides low-cost portable radio coverage in areas where only mobile radio coverage is available.
  • Page 54: Chapter 7: Advanced Features

    68012005051-GC Chapter 7: Advanced Features Chapter 7 Advanced Features This chapter explains the operations of the features available in your radio. Advanced Call Features This chapter explains the operations of the call features available in your radio. 7.1.1 Selective Call (ASTRO Conventional Only) A Selective Call is a call from an individual radio to another individual radio with privacy.
  • Page 55: Talkgroup Call Feature (Conventional Only)

    68012005051-GC Chapter 7: Advanced Features ● Use the keypad to enter the required ID. 3. Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 4. Press and hold the PTT button to start the Selective Call. The display shows the ID of the target radio.
  • Page 56: Making Priority Dispatch Calls

    68012005051-GC Chapter 7: Advanced Features Procedure: 1. Perform one of the following actions: ● Press the preprogrammed Status button. ● or to Sts and press the Menu Select button directly below Sts. The display shows the last acknowledged status call, or the first status in the list. 2.
  • Page 57: Classification Of Regrouped Radios

    68012005051-GC Chapter 7: Advanced Features When your radio is dynamically regrouped, it receives a dynamic regrouping command and automatically switches to the dynamically regrouped channel. You hear a tone and the display shows the name of the dynamically regrouped channel. When the dispatcher cancels dynamic regrouping, the radio automatically returns to the previous zone and channel.
  • Page 58: Entering The Dynamic Zone To Select A Dynamic Channel

    68012005051-GC Chapter 7: Advanced Features 7.1.6.1 Entering the Dynamic Zone to Select a Dynamic Channel Procedure: or to Zone then press the Menu Select button directly below Zone. The display shows the Zone screen. to <# Dynamic Zone Channels>. 3. Perform one of the following actions: ●...
  • Page 59: Deleting A Channel In The Dynamic Zone

    68012005051-GC Chapter 7: Advanced Features Procedure: or to ZnPr then press the Menu Select button directly below ZnPr to enter Program Zone screen. 2. Press the Menu Select button directly below Edit. The display shows Search Options screen. to Channel Name then press the Menu Select button directly below Sel . The display shows a blinking cursor on the Channel Name screen.
  • Page 60: Cloning Zones

    68012005051-GC Chapter 7: Advanced Features You can clone the zones by connecting the source radio and target radio with a clone cable. The target radio must be digital, band, and FCC mandate compatible with the source radio. 7.1.7.1 Cloning Zones Procedure: 1.
  • Page 61: Selecting Multiple Private Line

    68012005051-GC Chapter 7: Advanced Features Table 6: MPL Selection Mode Selection Mode Description Dynamic The MPL List selection/functionality is automatically updated (and active on the radio current channel) as users scroll through the avail- able MPL List selections. Static While users are scrolling through the radio available MPL List selec- tions, MPL functionality does not change until a new MPL List is manually selected.
  • Page 62: Making A Private Call From Contacts

    68012005051-GC Chapter 7: Advanced Features ● Call Alert Each entry within Contacts contains the following information: ● Call Alias (Name) ● Call ID (Number) ● Call Type (Icon) ● WACN ID (ASTRO 25 Trunking IDs only) ● System ID Your radio must be programmed to allow you to add, edit, or delete the contact entries. Your radio also supports a maximum of 50 call lists.
  • Page 63: Deleting A Contact Entry

    68012005051-GC Chapter 7: Advanced Features to [New Contact] and press the Menu Select button directly below Sel . to Name and press the Menu Select button directly below Edit. The display shows Edit name and a blinking cursor appears. 4. Use the keypad to enter the name and press the Menu Select button directly below Ok once you have entered the name.
  • Page 64: Adding A Contact To A Call List

    68012005051-GC Chapter 7: Advanced Features 7.3.4 Adding a Contact to a Call List Procedure: or to Cnts and press the Menu Select button directly below Cnts . The entries are alphabetically sorted. to the entry you want to add and press the Menu Select button directly below Optn . to Add to CallLst and press the Menu Select button directly below Sel .
  • Page 65: Editing As Entry Id

    68012005051-GC Chapter 7: Advanced Features The entries are alphabetically sorted. to the entry you want to edit and press the Menu Select button directly below Optn . to Edit and press the Menu Select button directly below Sel . to the entry alias you wish to change and press the Menu Select button directly below Edit . A blinking cursor appears.
  • Page 66: Viewing Details Of A Contact

    68012005051-GC Chapter 7: Advanced Features 6. Press the Menu Select button directly below Done to save your changes and return to the main screen of Contacts. 7.3.7 Viewing Details of a Contact Procedure: or to Cnts and press the Menu Select button directly below Cnts . The entries are alphabetically sorted.
  • Page 67: Editing The Scan List

    68012005051-GC Chapter 7: Advanced Features 7.4.3 Editing the Scan List When and where to use: This feature allows you to change scan list members and priorities. Procedure: 1. Perform one of the following actions: ● Long press the preprogrammed Scan List Programming button (side button). ●...
  • Page 68: Viewing And Changing The Priority Status

    68012005051-GC Chapter 7: Advanced Features ● Press the Select button one or more times to change the scan list status icon of the currently displayed channel. 4. Perform one of the following actions: ● to select more list members whose scan status you want to change. ●...
  • Page 69: Making A Dynamic Priority Change (Conventional Scan Only)

    68012005051-GC Chapter 7: Advanced Features If the scan is disabled, the display shows Scan Off. Result: The radio returns to the Home screen. 7.5.2 Making a Dynamic Priority Change (Conventional Scan Only) When and where to use: While the radio is scanning, the dynamic priority change feature allows you to temporarily change any channel in a scan list (except for the Priority-One channel) to the Priority-Two channel.
  • Page 70: Call Alert Paging

    68012005051-GC Chapter 7: Advanced Features Call Alert Paging This feature allows your radio to work like a pager. If other users are away from their radios or if they are unable to hear their radios, you can send them an individual call alert page.
  • Page 71: Recent Calls

    68012005051-GC Chapter 7: Advanced Features d. Press the PTT button to send the page. The display shows Paging...<Number>. If the call alert page is sent successfully, you hear a tone and the display shows Ack received. The radio returns to the Home screen. If the call alert page is not acknowledged, you hear a low tone and the display shows No acknowledge.
  • Page 72: Viewing Recent Calls

    68012005051-GC Chapter 7: Advanced Features 7.7.1 Viewing Recent Calls Do one of the following to view recent calls. You can use the options interchangeably depending on your preference and the programmed functions. Procedure: ● Viewing recent calls using the preprogrammed Recent Calls button: a.
  • Page 73: Instant Recall

    68012005051-GC Chapter 7: Advanced Features When you have successfully deleted all calls, your display shows All calls deleted and the Recent Calls list is empty. When you have successfully deleted non-emergency calls, your display shows Non-emer calls deleted and the Recent Calls list only contains emergency calls. 7.7.3 Instant Recall This feature allows you to save and play back the recent received calls.
  • Page 74: In-Call User Alert

    68012005051-GC Chapter 7: Advanced Features a. Long press the preprogrammed Record Playback button to save the recorded calls. Radio displays Audio Saved momentarily. Radio plays the saved call automatically if call saving is successful. A tone sounds if call saving is not successful. ●...
  • Page 75: Initiating Quick Call Ii Transmissions

    68012005051-GC Chapter 7: Advanced Features 7.9.1 Initiating Quick Call II Transmissions Prerequisites: Tone must be preprogrammed into the Tone Signaling List on the broadcasting or transmitting radio. Procedure: or to QCII, and press the Menu Select button directly below QCII. to select the tone to broadcast.
  • Page 76: Special Considerations For Emergency Operation

    68012005051-GC Chapter 7: Advanced Features 7.10.1 Special Considerations for Emergency Operation The following scenarios apply during Emergency operation: Table 7: Emergency Operation Scenarios Scenario Outcome If you press the Emergency button while in a a tone sounds. channel that has no Emergency capability, If you change to a channel or mode with no Emer- your radio shows the following indications: gency capability while in Emergency operation,...
  • Page 77: Remote Emergency

    68012005051-GC Chapter 7: Advanced Features Procedure: Perform one of the following actions: If… Then… If the emergency mode is initiated press and hold the Side Button 1 and press the Emergency by other radios, button. If the emergency mode is initiated Perform one of the following actions: by the Supervisor, ●...
  • Page 78: Sending Remote Emergency By Entering The User Id

    68012005051-GC Chapter 7: Advanced Features If your radio does not receive acknowledgment from the target radio, your radio displays a negative notification. 7.10.5.2 Sending Remote Emergency by Entering the User ID Procedure: 1. Press the programmed Remote Emergency button. 2. Press any digit key. 3.
  • Page 79: Sending An Emergency Alarm

    68012005051-GC Chapter 7: Advanced Features Procedure: 1. Press the programmed Remote Emergency button. 2. Press the Fltr menu item button. Result: Your radio displays the filtered call list. 7.10.6 Sending an Emergency Alarm When and where to use: This feature allows you to send a data transmission, which identifies the radio sending the emergency, to the dispatcher.
  • Page 80: Sending An Emergency Call With Hot Mic (Trunking Only)

    68012005051-GC Chapter 7: Advanced Features 7.10.8 Sending An Emergency Call With Hot Mic (Trunking Only) This feature allows you to send an Emergency Call with hot mic to a group of radios. When and where to use: Your radio must be programmed for this type of operation. Your radio microphone is automatically activated, allowing you to communicate with the group of radios without pressing the PTT button.
  • Page 81: Sending An Emergency Alarm And Call With Hot Mic

    68012005051-GC Chapter 7: Advanced Features 2. Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3. Press and hold the PTT button. Speak clearly into the microphone. 4. Release the PTT button to end the transmission and wait for a response from the dispatcher. 5.
  • Page 82: Emergency Find Me

    68012005051-GC Chapter 7: Advanced Features ● Press and release the PTT button to exit the Silent Emergency Alarm mode and enter regular dispatch or Emergency Call mode. 7.10.12 Emergency Find Me When the radio is in Emergency mode, the Emergency Find Me feature transmits Bluetooth Low Energy (BTLE) signals, and other emergency information to nearby radios.
  • Page 83: Radio Alerts When Fall Alert Is Triggered

    68012005051-GC Chapter 7: Advanced Features Your radio activates the Fall Alert feature when it achieves or exceeds a tilt angle threshold or a combination of the angle threshold and radio motion below the motion sensitivity level. The radio must stay in this condition for a programmed period before the Emergency Alarm or Call is activated.
  • Page 84: Exiting Fall Alert

    68012005051-GC Chapter 7: Advanced Features 7.12.3 Exiting Fall Alert Procedure: To exit Fall Alert mode, press Clr. 7.12.4 Reinitiating Fall Alert Procedure: To reinitiate Fall Alert after exiting Emergency Operation, perform one of the following actions: ● Return the radio to a vertical position. ●...
  • Page 85: User Login Feature

    68012005051-GC Chapter 7: Advanced Features ○ In ARS Server Mode, the display shows the zone and ARS server channel. ○ In ARS Non-Server Mode, the display shows the zone and ARS non-server channel. ○ If the channel or mode selected is unprogrammed, the display shows Unprogrammed. 7.13.2 User Login Feature This feature only supports Model 3.5.
  • Page 86: Logging Out

    68012005051-GC Chapter 7: Advanced Features ● If the user name is invalid, login fails and the user login failure indicator (IP indicator) icon blinks. The display also shows Login failed. ● If the PIN is invalid, login fails and the user login failure indicator (IP indicator) icon blinks. The display also shows Login failed.
  • Page 87: Accessing The Messaging Features

    68012005051-GC Chapter 7: Advanced Features 7.14.1 Accessing the Messaging Features Procedure: 1. Perform one of the following actions: ● Press the Data Feature button or the preprogrammed TMS Feature button to access the TMS feature screen. ● Press and hold the Data Feature button or the preprogrammed TMS Feature button to access the Inbox.
  • Page 88: Sending A Quick Text Message

    68012005051-GC Chapter 7: Advanced Features If the message is not sent, you hear a low tone, the display shows Send failed and returns to the main TMS screen. NOTE: You can append a priority status and/or a request reply to your message. See Priority Status and Request Reply for New Text Messages on page 89 for more information.
  • Page 89: Priority Status And Request Reply For New Text Messages

    68012005051-GC Chapter 7: Advanced Features If the message is not sent, you hear a low tone, the display shows Send failed and returns to the main TMS screen. NOTE: You can append a priority status and/or a request reply to your message. See Priority Status and Request Reply for New Text Messages on page 89 for more information.
  • Page 90: Removing A Request Reply From A Text Message

    68012005051-GC Chapter 7: Advanced Features Procedure: 1. Press the Menu Select button directly below Optn . to Req Reply and press the Menu Select button directly below Sel to request for a reply. Result: The request reply icon appears beside the normal message icon on the label bar. 7.14.4.4 Removing a Request Reply from a Text Message Prerequisites: Ensure that an outgoing message is composed to allow you to perform this procedure.
  • Page 91: Receiving A Text Message

    68012005051-GC Chapter 7: Advanced Features 7.14.4.7 Receiving a Text Message When and where to use: NOTE: When you receive a message that is flagged with the Request Reply icon, you must manually respond to the sender that you have received the message. The system does not automatically send a notification to acknowledge that the message was received.
  • Page 92: Replying To A Received Text Message

    68012005051-GC Chapter 7: Advanced Features 7.14.4.9 Replying to a Received Text Message When and where to use: NOTE: The original date and time stamp, address, and message content is automatically appended to the reply message. Procedure: to the required aliases or ID and press the Menu Select button below Sel to view the message.
  • Page 93: Sent Text Messages

    68012005051-GC Chapter 7: Advanced Features to the required text message and press the Menu Select button below Sel to view the message. ● Select Edit to edit the message before sending it. ● Select Del to delete the message. ● Select Back to return to the previous screen.
  • Page 94: Deleting A Text Message

    This feature only supports Model 3.5. The ASTRO 25 Advanced Messaging Solution allows you to quickly send and receive messages and run database queries directly from your data-enabled Motorola Solutions two-way radios. Federal mandate requires Two-Factor Authentication when querying Federal and State databases.
  • Page 95: Two-Factor Authentication

    68012005051-GC Chapter 7: Advanced Features Query and Two-Factor Authentication have Criminal Justice Information Services (CJIS) security compliance for queries. 7.15.1 Two-Factor Authentication This feature only supports Model 3.5. This feature allows you to log in and authenticate yourself with a username, unit ID, password, and passcode. The user login feature enables the recipient of your message to identify you as the sender by assigning a username to your message.
  • Page 96: Logging Out Of Two-Factor Authentication

    68012005051-GC Chapter 7: Advanced Features ● Press and hold to scroll through the list of predefined Unit IDs at a fast scroll rate. Press the Menu Select button directly below Sel to select the predefined Unit ID. If the selected predefined Unit ID has more than the maximum allowed characters, or an invalid character in it, the display shows momentary Invalid UnitID.
  • Page 97: Receiving A Query

    68012005051-GC Chapter 7: Advanced Features You shall receive a service advertisement message to indicate the Query is available after you have successfully logged in the radio with a Two-Factor Authentication. NOTE: The query server must be selected as the destination so that it can receive the query message and respond the query with text message.
  • Page 98: Secure Operations

    68012005051-GC Chapter 7: Advanced Features When you receive a query, you hear a unique, high-pitched chirp and the display shows the message icon flagged with “Priority”. The display shows momentary New msg. Procedure: To access the Inbox, press and hold the Data Feature button or the preprogrammed TMS Feature button or press the Menu Select button directly below TMS.
  • Page 99: Loading Encryption Keys

    68012005051-GC Chapter 7: Advanced Features 7.16.3.1 Loading Encryption Keys Prerequisites: ● Refer to the Key Variable Loader (KVL) manual for equipment connections and setup. ● For first-time usage, turn on the radio for a minimum of three hours before you remove the battery. Else the radio may not be able to retain its key for 30 seconds.
  • Page 100: Selecting Keysets

    68012005051-GC Chapter 7: Advanced Features 4. Perform one of the following actions: ● Press the Menu Select button directly below Sel to save the newly selected key and return to the Home screen. ● Press , the PTT button, or the Menu Select button directly below Exit. ●...
  • Page 101: Requesting An Over-The-Air Rekey

    68012005051-GC Chapter 7: Advanced Features or to Eras and press the Menu Select button directly below Eras. The display shows the last user-selected and stored encryption key, and the available menu selections. to the desired encryption key or use the keypad to enter the number of the desired key. c.
  • Page 102: Mdc Otar (Conventional Only)

    7.16.3.7 MDC OTAR (Conventional Only) This feature allows you to view or define the Motorola Data Communications (MDC) Over-the-Air Rekeying (OTAR) features. This feature is applied only when operating in secure encrypted mode. In addition to Rekey Requests, OTAR transmissions include Delayed Acknowledgments, and Power-up Acknowledgments.
  • Page 103: Enabling Or Disabling Radio Lock (Secure Radios Only)

    68012005051-GC Chapter 7: Advanced Features The new password must be different from the default password. Your service provider determines the following requirements: ● Number of characters for a password (maximum 10 characters). ● Number of attempts for password entry. If you exhaust all attempts at entering the correct password, the radio is deadlocked. Restart the radio to start over.
  • Page 104: Changing The Tactical Inhibit Password

    68012005051-GC Chapter 7: Advanced Features If the two passwords do not match, repeat step 5 through step NOTE: If you enter three incorrect old passwords, the radio exits the password feature. You cannot access this feature again until you turn the radio off and on. 7.17.3 Changing the Tactical Inhibit Password The Tactical Inhibit Password is required for the Radio Stun and Radio Kill features.
  • Page 105: Using Radio Stun

    68012005051-GC Chapter 7: Advanced Features This feature allows you to stun another radio by sending an Over-The-Air command using the menu on your radio. This feature prevents an unauthorized user from using the radio. Once the radio is stunned, a password is required to reactivate the stunned radio.
  • Page 106: Using Direct Kill To Kill Your Own Radio

    68012005051-GC Chapter 7: Advanced Features 2. Press the Menu Select button directly below Kill. The display shows Enter Password. 3. Use the keypad to enter your Tactical Inhibit Encode Password. 4. Press the Menu Select button directly below Ok . The display shows the radio Contact IDs.
  • Page 107: Outdoor Location Feature

    68012005051-GC Chapter 7: Advanced Features The availability and accuracy of this location information and the calculation duration can vary depending on the environment in which you are using the GPS feature. For example, GPS location fixes are difficult to obtain indoors, in covered locations, between high buildings, or in situations where you have not established a clear broad view of the sky.
  • Page 108: Mgrs Coordinates

    68012005051-GC Chapter 7: Advanced Features ● SLD99 ● MGRS NOTE: When you send your location to another radio, the receiving radio displays the location in its selected format. 7.20.3 MGRS Coordinates This feature only supports Model 3.5. Military Grid Reference System (MGRS) can only be enabled through Customer Programming Software (CPS) configuration.
  • Page 109: Selecting Location Format

    68012005051-GC Chapter 7: Advanced Features 7.20.5 Selecting Location Format Procedure: or to Loc. 2. Press the Menu Select button directly below Loc. 3. Press the Menu Select button directly below Optn. to Loc Format and press the Menu Select button directly below Sel. to the preferred location format and press the Menu Select button directly below Sel.
  • Page 110: Viewing A Saved Waypoint

    68012005051-GC Chapter 7: Advanced Features 7.20.7 Viewing a Saved Waypoint Prerequisites: Ensure your radio shows the current location on the screen. Procedure: 1. Press the Menu Select button directly below Optn. to Waypoints and press the Menu Select button directly below Sel. The display shows a list of waypoints.
  • Page 111: Editing The Coordinates Of A Waypoint

    68012005051-GC Chapter 7: Advanced Features 7.20.9 Editing the Coordinates of a Waypoint When and where to use: NOTE: You can only edit preprogrammed coordinates of Home and Destination. Ensure that your radio shows the current location on the screen. Procedure: 1.
  • Page 112: Deleting All Saved Waypoints

    68012005051-GC Chapter 7: Advanced Features Procedure: 1. Press the Menu Select button directly below Optn. to Waypoints and press the Menu Select button directly below Sel . The display shows a list of waypoints. 3. Perform one of the following actions: ●...
  • Page 113: Location Feature In Emergency Mode

    68012005051-GC Chapter 7: Advanced Features to Dist frm here and press the Menu Select button directly below Sel . The display shows a list of waypoints. to the required waypoint and press the Menu Select button directly below Sel . Result: The display shows the distance and bearing from the current to the selected coordinates.
  • Page 114: Mission Critical Geofence (Astro 25 Trunking)

    68012005051-GC Chapter 7: Advanced Features 7.21 Mission Critical Geofence (ASTRO 25 Trunking) This feature allows your radio to use the Global Positioning System (GPS) receiver to determine its location at frequent intervals, and evaluate if the radio is within the Geofence area in real time. Geofence is a virtual perimeter based on the GPS to define a geographical area on earth.
  • Page 115: Mission Critical Geofence

    68012005051-GC Chapter 7: Advanced Features When the radio exits the Geofence area, your radio reverts to original channel or newly assigned talkgroup. The radio display shows the new channel together with Voice Announcement to indicate the changes. Voice Announcement of the new channel only works if that channel is configured with Voice Announcement. 7.21.2 Mission Critical Geofence This feature allows the radio to use the GPS receiver to determine radio location at frequent intervals and...
  • Page 116: Out-Of-Range Radio

    SmartConnect. Your radio can connect through a fixed Wi-Fi access point in buildings or in-vehicle Broadband modem such as the following modems: ● Motorola Solutions VML750 ● Sierra Wireless MP70 ● Sierra Wireless GX450 Your radio displays the SmartConnect capable icon on the SmartConnect enabled channel.
  • Page 117: Site Trunking Feature

    68012005051-GC Chapter 7: Advanced Features 7.22.4 Site Trunking Feature If the Zone Controller loses communication with any site, that site reverts to site trunking. When this occurs, you can communicate only with the radios within your trunking site. The display shows the currently selected zone or channel, and the site trunking message. 7.22.5 Site Search When searching for a site, your radio is inoperable.
  • Page 118: Changing The Current Site

    (your device or accessory). Obstacles that can cause an obstruction in the line-of-sight include trees, buildings, mountains, cars, and others. For high degree of reliability, Motorola Solutions recommends to NOT separate the radio and the accessory.
  • Page 119: Pin Authentication In Pairing

    68012005051-GC Chapter 7: Advanced Features At the fringe areas of reception, both voice and tone quality will start to sound "garbled" or "broken". To correct this problem, simply position the accessory and radio closer to each other (within the 10 meter defined range) to re-establish clear audio reception.
  • Page 120: Pairing The Authentication Pin With The Generated Numeric Pin

    68012005051-GC Chapter 7: Advanced Features When the pairing timer expires, the display shows <Device Friendly Name> pair canceled and return to Home screen. If you choose to accept the pairing process, the display shows Compare PIN: XXXXXX. If you choose to reject the pairing process, the display shows Cancel pairing in progress... followed by <Device Friendly Name>...
  • Page 121: Viewing And Clearing The Bluetooth Device Information

    68012005051-GC Chapter 7: Advanced Features If unsuccessful, one of the following scenarios will occur: ● The display shows <Device Friendly Name> pair failed (if the PIN numbers are different). ● <Device Friendly Name> connect failed (if the connection fails). The display returns to Available Dev screen. 7.23.3 Viewing and Clearing the Bluetooth Device Information Procedure:...
  • Page 122: Responder Alert Sensors

    68012005051-GC Chapter 7: Advanced Features to Friendly name and press the Menu Select button directly below Edit. A blinking cursor appears in the Friendly Name screen. 3. Use the keypad to edit the text. 4. Perform one of the following actions: ●...
  • Page 123: Low Battery Notification

    68012005051-GC Chapter 7: Advanced Features The receiving radio displays VPierced RCVD to indicate that the sender is in a Vest Pierced Emergency event. 7.23.5.4 Low Battery Notification This feature only supports Model 3.5. When the holster or weapon fire sensor battery is below the preset threshold value, the radio displays <BT alias>...
  • Page 124: Astro 25 (P25) Programming Over Project 25 (Pop25)

    68012005051-GC Chapter 7: Advanced Features 2. Long-press the preprogrammed Sensor button or the preprogrammed Menu Select button again to enable the OTA Sensor notification. A tone sounds, and the radio displays Sensor On. 7.24 ASTRO 25 (P25) Programming Over Project 25 (POP25) Also called Over-the-Air Programming, this feature allows configuration data and firmware to be upgraded to your radio over-the-air.
  • Page 125: Voice Announcement

    68012005051-GC Chapter 7: Advanced Features 7.25 Voice Announcement This feature enables the radio to audibly indicate the current feature mode, zone, or channel assigned to the user. The available voice announcement (VA) priority options are: High Voice announcement is enabled even when the radio is receiving calls. Voice announcement is disabled when the radio is receiving calls.
  • Page 126: Sending Ssa Notification To Single Site By Manual Entry

    68012005051-GC Chapter 7: Advanced Features If the site is not available, the display shows <Site Alias> not available. If the site does not exist, the display shows <Site Alias> does not exist. 6. To return to the Home screen, press the Menu Select button directly below Exit. Result: If you are at the site designated to receive this alert, you can hear an alert tone repeated periodically.
  • Page 127: Sending Ssa Notification To All Available Sites

    68012005051-GC Chapter 7: Advanced Features 2. Press the Menu Select button directly below SSA. The display shows the Site Alert screen. to Start Alert and press the Menu Select button directly below Sel. The display shows the Select Site screen. to [All Sites] and press the Menu Select button directly below Sel.
  • Page 128: Stopping Ssa Notification Of A Single Site

    68012005051-GC Chapter 7: Advanced Features 7.26.5 Stopping SSA Notification of a Single Site Procedure: or to SSA. 2. Press the Menu Select button directly below SSA. The display shows the Site Alert screen. to Stop Alert and press the Menu Select button directly below Sel. The display shows the Select Site screen.
  • Page 129: Stopping Ssa Notification Of All Sites

    68012005051-GC Chapter 7: Advanced Features ● If the single site is not available, the display shows <Site ID> not available. ● If the single site does not exist, the display shows <Site ID> does not exist. 6. To return to the Home screen, press the Menu Select button directly below Exit. Result: The SSA Alert for the designated site stops.
  • Page 130: Wi-Fi

    68012005051-GC Chapter 7: Advanced Features 5. To return to the Home screen, press the Menu Select button directly below Exit. Result: The SSA Alert for all available sites stop. 7.27 Wi-Fi You can connect your radio to a Wi-Fi network for wireless programming and SmartConnect features. Your service administrator programs the Wi-Fi Service Set Identifier (SSID) or network name that your radio can connect to.
  • Page 131: Checking The Wi-Fi Configuration And Status Of The Radio

    68012005051-GC Chapter 7: Advanced Features 4. Press to scroll through the list and press Menu Select button directly below Sel to connect to the selected network. Result: Radio displays the WiFi status, the selected network, and the signal strength. NOTE: The List and RfshRefreshRFSH buttons are not available when WiFi is searching or connecting to network.
  • Page 132: Selecting A Basic Zone Bank

    68012005051-GC Chapter 7: Advanced Features 7.28.2 Selecting a Basic Zone Bank Prerequisites: The Basic Zone Select feature must be programmed to the 3-Position A/B/C Switch, while the Basic Zone Bank feature must be programmed to any side button or Top (Orange) button to use this feature.
  • Page 133: Selecting An Enhanced Zone Bank

    68012005051-GC Chapter 7: Advanced Features Do one of the following to select a radio profile. You can use the options interchangeably depending on your preference and the programmed functions. Procedure: ● Selecting a radio profile using the preprogrammed Profile button: a.
  • Page 134: Selecting The Audio Speaker

    68012005051-GC Chapter 7: Advanced Features This feature allows you to display or hide the radio alias (name). Procedure: Press the MyID menu item. Result: The display shows momentary Radio ID off, and the radio alias disappears from the Home screen or the display shows momentary Radio ID on, and the radio alias appears on the Home screen. 7.28.6 Selecting the Audio Speaker Prerequisites: Your radio must be preprogrammed to allow you to use this feature.
  • Page 135: Setting Up The Radio Display And Visual Indicators To Suit Night Vision Goggles

    68012005051-GC Chapter 7: Advanced Features You can also maintain a minimum backlight level on the radio front display, depending on how your radio is programmed. NOTE: The backlight setting also affects the Menu Select buttons, the Navigation button, and the keypad backlighting accordingly.
  • Page 136: Locking And Unlocking The Keypad And Controls

    68012005051-GC Chapter 7: Advanced Features to the designated NVG profile. d. To select the required radio profile, press the Menu Select button directly below Sel or to exit the screen without making any changes, press the Menu Select button directly below Exit. The radio returns to the Home screen with NVG display mode.
  • Page 137: Using The Time-Out Timer

    68012005051-GC Chapter 7: Advanced Features a. To turn the feature off or on, press the preprogrammed Voice Mute button. ● Turning Voice Mute on or off using the radio menu: or to VMut. b. Press the Menu Select button directly below VMut. Result: The display shows Voice mute off, and you hear a short tone, indicating that the feature is disabled or the display shows Voice mute on, and you hear a short tone, indicating that the feature is enabled.
  • Page 138: Conventional Squelch Operation

    68012005051-GC Chapter 7: Advanced Features 3. Press the Menu Select button directly below Edit. The first item blinks. 4. Perform one of the following actions: ● to change the selected item. ● or one or more times to move to an item you wish to change. to change the selected item.
  • Page 139: Using Conventional Squelch Operation Features

    68012005051-GC Chapter 7: Advanced Features 7.28.14.1 Using Conventional Squelch Operation Features Procedure: or to Sql. 2. Press the Menu Select button directly below Sql. The display shows Squelch XX, where XX is the value for the current squelch. 3. Perform one of the following actions: ●...
  • Page 140: Transmit Inhibit

    68012005051-GC Chapter 7: Advanced Features Mode Description Transmit Inhibit on Busy Channel with Carrier You cannot transmit if traffic is detected on the channel. Transmit Inhibit on Busy Channel with Wrong You cannot transmit on an active channel with a Squelch Code squelch code or (if secure-equipped) encryption key other than your own.
  • Page 141: Disabling Transmit Inhibition

    68012005051-GC Chapter 7: Advanced Features 7.28.18.2 Disabling Transmit Inhibition Procedure: Perform one of the following actions: ● Switch the preprogrammed Transmit Inhibit switch to Transmit Inhibit disabled position. ● or to TxIn. Press the Menu Select button below TxIn. ● Press the Transmit Inhibit programmable button.
  • Page 142: Viewing The Ip Information

    68012005051-GC Chapter 7: Advanced Features ● Processor Version ● Language Pack ID and Version (only when the language of the display is set to non-English) ● MAC Address ● Codeplug Alias (Optional) NOTE: To return to the Home screen, press at any time.
  • Page 143: Editing The Soft Id

    68012005051-GC Chapter 7: Advanced Features Programmable Features on page 27 for more information on the various programmable features of your radio. Procedure: 1. Perform one of the following actions: ● Press the preprogrammed Info button. ● or to Info and press the Menu Select button directly below Info. to Control map and press the Menu Select button directly below Sel.
  • Page 144: Initiating The Fpp Feature

    Changing Password (Optional) This feature only supports Model 3.5. Radios from the Motorola Solutions factory are provisioned with a blank password. Prerequisites: To access the protected channels, press OK when the Enter Old Password prompts you to change the password.
  • Page 145: Selecting A Channel Within A Zone

    68012005051-GC Chapter 7: Advanced Features Procedure: 1. Press EDIT. 2. Enter the old password. 3. Enter the new password. 4. To accept the entry, enter the new password again. 7.28.20.3 Selecting a Channel within a Zone Procedure: 1. Press or to FPP and press the Menu Select button directly below FPP. The radio displays the Enter password screen 2.
  • Page 146: Editing Parameters

    68012005051-GC Chapter 7: Advanced Features 7.28.20.5 Editing Parameters When and where to use: Use the keypad to enter the numeric digits. Each key can generate different characters of the alphabet through multiple presses of the same key. For all parameters except Chan Name, Zone Name, Top Chan Name and Top Zone Name the or buttons increment or decrement the selected value by scrolling through the valid entries.
  • Page 147 68012005051-GC Chapter 7: Advanced Features Parameter Editing Keys Value Scan List None/Scan List 1, 2, 3,... Zone Name Use keypad to enter numbers and alphabet characters. For more information, see Text Entry Icons on page Top Chan Name Top Zone Name Chan Name NOTE:...
  • Page 148: Chapter 8: Accessories

    68012005051-GC Chapter 8: Accessories Chapter 8 Accessories Not all accessories are FCC certified to operate with all radio models, band splits, or both. See the radio price pages for a list of FCC certified accessories or contact your sales representative for accessory compatibility. https://www.motorolasolutions.com to know more about the accessories supported by this radio.
  • Page 149: Legal And Compliance Statements

    Furthermore, Motorola Solutions reserves the right to change any products to improve readability, function, or design. Motorola Solutions does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights, nor the rights of others.
  • Page 150: Important Safety Information

    (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter is approved by ISED to operate with a Motorola Solutions-approved antenna with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
  • Page 151: Fcc Licensing Information

    Applying for Canadian License The operation of your Motorola Solutions radio is subject to the Radio communications Act and must comply with rules and regulations of the Federal Government's department of Innovation, Science, and Economic Development Canada (ISED).
  • Page 152: Maritime Radio Use In The Vhf Frequency Range

    68012005051-GC Maritime Radio Use in the VHF Frequency Range Maritime Radio Use in the VHF Frequency Range Special Channel Assignments Emergency Channel If you are in imminent and grave danger at sea and require emergency assistance, use VHF Channel 16 to send a distress call to nearby vessels and the United States Coast Guard.
  • Page 153: Table 9: Vhf Marine Channel List

    68012005051-GC Maritime Radio Use in the VHF Frequency Range ○ in the simplex mode on the ship station transmitting frequencies specified in the 156.025–157.425 MHz frequency band, and ○ in the semiduplex mode on the two frequency channels specified in the table below. NOTE: Simplex channels 3, 21, 23, 61, 64, 81, 82, and 83 cannot be lawfully used by the general public in US waters.
  • Page 154 68012005051-GC Maritime Radio Use in the VHF Frequency Range 157.400 162.000 156.025 160.625 156.075 160.675 156.125 160.725 156.175 160.775 156.225 160.825 156.275 160.875 156.325 160.925 67** 156.375 156.375 156.425 156.425 156.475 156.475 156.575 156.575 156.625 – 156.675 156.675 156.725 156.725 77** 156.875 –...
  • Page 155: Declaration Of Compliance For The Use Of Distress And Safety Frequencies

    68012005051-GC Maritime Radio Use in the VHF Frequency Range Declaration of Compliance for the Use of Distress and Safety Frequencies The radio equipment does not employ a modulation other than the internationally adopted modulation for maritime use when it operates on the distress and safety frequencies specified in RSS-182 Section 5.4. Technical Parameters for Interfacing External Data Sources RS232...
  • Page 156: Limited Warranty

    Product Accessories One (1) Year MOTOROLA SOLUTIONS, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty.
  • Page 157: Ii. General Provisions

    68012005051-GC Limited Warranty in the terms and conditions. Repairs will be made only at the designated MOTOROLA SOLUTIONS repair depot. Local services are not included. MOTOROLA SOLUTIONS will pay the inbound shipping charges only with use of the MOTOROLA SOLUTIONS designated delivery service. MOTOROLA SOLUTIONS will pay for outbound shipping via MOTOROLA SOLUTIONS'S normal shipping methods.
  • Page 158: Vi. Patent And Software Provisions

    1. that MOTOROLA SOLUTIONS will be notified promptly in writing by such purchaser of any notice of such claim, 2.
  • Page 159: Vii. Governing Law

    This provision applies to products and services supplied by Motorola Solutions to consumers within the meaning of the Australian Consumer Law. This warranty is given by Motorola Solutions Australia Pty Limited (ABN16 004 742 312) of Tally Ho Business Park, 10 Wesley Court. Burwood East, Victoria. Our goods come with guarantees that cannot be excluded under the Australia Consumer Law.

Table of Contents