1. Unpack the System
Inspect the chassis to see whether the appliance has been damaged
in any way. If the appliance appears to be damaged, please contact
Nozomi Networks support at: support@nozominetworks.com.
Box contents:
•
Nozomi Networks NSG-R 50 Guardian appliance
•
External PSU
•
Spare PSU connector
•
1x Grounding cable
•
1x USB to DB9 console cable
2. Setup precautions and considerations
Please follow the General Safety Guidelines included in the box to
prevent potential property damage, personal injury or even death.
Furthermore, observe the following rules:
•
Before performing any of the following procedures, ensure that
power has been removed from the AC or DC circuit.
3. Unbox the appliance and DIN mounting
Unbox the appliance.
Make sure that your DIN rail is properly installed.
Clip the appliance onto the DIN rail, keeping at least the minimum clearance
from the other appliances:
•
10mm per system when operating temperature is between +25°C and +39°C
(77°F and 102 °F)
•
100mm per system when operating temperature is between +40°C and +75°C
(104 °F and 167 °F )
4. Grounding
A reliable ground must be maintained at all times. To ensure this,
the rack itself should be grounded and the appliance chassis
should be connected for grounding to the rack via the provided
appliance grounding cable.
Grounding
screw
QUICK START GUIDE
Nozomi Networks NSG-R 50 Guardian Appliance
QUICK START GUIDE
Nozomi Networks NSG-R 50
Guardian Appliance
Getting Started
•
Read the installation instructions before you connect the system
to its power source.
•
Warning: To prevent the system from overheating, do not operate
it in an area that exceeds the maximum recommended ambient
temperature of:
Operating Environment
Storage Environment
5. Connect the management port
Connect the management port (MGMT) (1) to the designated
network switch or equipment.
1
Temperature: -40 – 75°C (-40 – 167°F)
Humidity: 5 – 95 % RH
Temperature: -40 – 85°C (-40 – 185°F)
Humidity: 5 – 95 % RH
nozominetworks.com
Need help?
Do you have a question about the NSG-R 50 and is the answer not in the manual?
Questions and answers