Retevis RT628 User Manual page 4

Installing the AA Batteries
Your radio uses 3 AA Alkaline batteries.
1. With the back of the radio facing you, there are a secret button to
release the battery cover and remove.
2. Install 3 AA Alkaline batteries as shown on the inside of the
battery compartment.
3. Re-cover the battery cover and press down to secure.
The Walkie-Talkie can use a NiMH rechargeable battery instead of
3 AA Alkaline batteries.
The battery icon shows the battery charge level, aml from full to
empty ——». When the battery is empty, the radio chirps periodically
after releasing . The radio powers off when the voltage drops
below a predetermined level to protect the rechargeable battery life.
Note: Remove the batteries before storing your radio for extended
periods of time. Batteries corrode over time and may cause
permanent damage to your radio.
After you install batteries turn the radio on, the radio chirps and the
display briefly shows all feature icons available on your radio. The
~ display then scrolls through the available channels and Interference
Eliminator Codes. Press and hold ©) button turn the radio off.
Page 2