Product Safety and RF Exposure booklet Belt Clip enclosed with your radio. User guide CAUTION Battery Adapter desk stand charger Specification TECHNICAL PARAMETERS Product number RT602 Antenna Frequency range Flashlight Channel number Keypad Lock Icon Batter Meter Channel spacing 12.5KHz VOX Icon Inaudible Tone/...
10.LED Flashlight TRANSMITER 11.LCD screen (backlighted display) RF power 0.5W 12.Low battery warning Modulation method 11k F3E ○ 13.Roger beep(support to switch on or off the the Noise and harmonic <-40dB function of roger tone) Residual Radiation ≤-35dB 14.VOX( Sensitivity Level 1,2,3) Modulation distortion ≤7% 15.Memory function and Reset to factory defaults...
Page 4
4. Keyboard lock set desired combination(OF position is to switch off Long press M key to enable keypad lock in order to CTCSS/CDCSS. Codes 01-38 are CTCSS codes prevent accidental operation. while codes 39-99 CDCSS codes.) Note: Interference eliminator codes could only 5.
Page 5
Press UP or DOWN button to turn it The Stylized RETEVIS logos are registered trademarks on or off . of Shenzhen Retevis Technology Co., Ltd, which are used under license. All other trademarks are the 12. How to communicate property of their respective owners.
Page 6
RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All Retevis walkie talkie are designed, manufactured, and tested to ensure they meet government-established...
Page 7
These instructions are important because Safety Marking) they inform users about RF energy exposure and Your Retevis walkie talkie is designed and tested to provide simple procedures on how to control it. comply with a number of national and International standards and guidelines (listed below) for human exposure to radio frequency electro-magnetic energy.
Radio Frequency Electromagnetic Fields. • When operating in front of the face, worn on the body, • Institute of Electrical and Electronic Engineers always place the radio in a Retevis approved clip, (IEEE) C95.3-2002 holder, holster, case, or body harness for this product.
Page 9
(one inch) away from the nose or lips. To avoid electromagnetic interference and/ The antenna should be kept away from the eyes. or compatibility conflicts Keeping the radio at a proper distance is important • Turn off your radio in any facility where posted as RF exposure decreases with increasing distance notices instruct you to do so, hospitals or health from the antenna.
Page 10
• Unplug the charger from the AC outlet before • Turn down the volume before adding headset attempting any maintenance or cleaning. or earpiece. • Contact Retevis for assistance regarding • Limit the amount of time you use headsets or repairs and service. earpieces at high volume.
WARNING supplied or designated for the product. Use of other accessories may not ensure compliance with the RF exposure guidelines and may violate regulations. • For a list of Retevis-approved accessories for your radio model, visit the following website: http://www.Retevis.com...
Page 12
Room 700, 7/F, 13-C, Zhonghaixin Science&Technology Park, No.12 Ganli 6th Road, Buji Street, Longgang District, Shenzhen, China Web:www.retevis.com E-mail:kam@retevis.com Facebook:facebook.com/retevis MADE IN CHINA...
Need help?
Do you have a question about the RT602 and is the answer not in the manual?
Questions and answers