Related Manuals for Sanipex AQUAECO AQE-ECO-I307
Summary of Contents for Sanipex AQUAECO AQE-ECO-I307
- Page 1 AQUAECO Wall Mounted Touchless Taps AQE-ECO-I307 CONCEALED TOUCHLESS BASIN TAP INSTALLATION AND MAINTENANCE GUIDE...
-
Page 3: Components Provided
COMPONENTS COMPONENTS PROVIDED TOOLS REQUIRED ALLEN KEY CONTROL BOX SCREWDRIVER BATTERY BOX x1 DRILL SPOUT x1 x1 ADJUSTABLE SPANNER PVC PIPE For more information visit www.sanipexgroup.com... - Page 4 ATTENTION IMPORTANT PLEASE READ All products manufactured and supplied by BAGNODESIGN are fit for purpose as long as they are Installed, used correctly, cleaned and receive regular maintenance in accordance with these instructions. Remove all packaging and check the product for damage or missing parts before commencing with the installation. Any alterations made to this product and its components may infringe product certification, infringe water regulations and invalidate the guarantee.
- Page 5 ATTENTION WARNING: PRODUCT CLEANING FLUSH THE We recommend cleaning with a soft damp cloth and mild soap solution. PIPES BEFORE CONNECTING DO NOT use cream cleaners or cleaners containing bleach. DO NOT scrub or scour. DO NOT use abrasive cleaning agents. DO NOT use solvent based cleaners.
-
Page 6: Specification
SPECIFICATION PRODUCT DIMENSION REQUIRED HEIGHT RECOMMENDED DIMENSION 250mm Minimum For more information visit www.sanipexgroup.com... -
Page 7: Installation
INSTALLATION 1070 For more information visit www.sanipexgroup.com... - Page 8 INSTALLATION 1070 For more information visit www.sanipexgroup.com...
-
Page 9: Clean Filter
MAINTENANCE CLEAN FILTER For more information visit www.sanipexgroup.com... -
Page 10: Troubleshooting
TROUBLESHOOTING Problem Cause Solution The battery is drained Change the battery Check supply Water supply off No water Clean the filter Dirt in the filter Water pressure too low Raise the pressure Dirt on the sensor window Clean the sensor Water will not turn off Water supply is turned down Adjust water supply... -
Page 11: Warranty
Product Technical Specification sheet (“Warranty Period”). Liability of Sanipex Group shall be limited to either repairing or replacing the faulty Products, at its sole discretion, if the same are within the Warranty Period. If Sanipex Group has ceased manufacturing the Product and is unable to replace the Product or provide a suitable part, Sanipex Group will offer to replace the Product with a suitable alternative product that matches the Product as closely as possible.
Need help?
Do you have a question about the AQUAECO AQE-ECO-I307 and is the answer not in the manual?
Questions and answers