Download Print this page

Sanipex AQUAECO AQE-ECO-I302M-A-CP Installation Manual

Deck mounted touchless tap

Advertisement

Quick Links

AQUAECO
WASHROOM AND PLUMBING SOLUTIONS
AQE-ECO-I302M-A-CP
AQUAECO DECK MOUNTED TOUCHLESS TAP
www.sanipexgroup.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the AQUAECO AQE-ECO-I302M-A-CP and is the answer not in the manual?

Questions and answers

Summary of Contents for Sanipex AQUAECO AQE-ECO-I302M-A-CP

  • Page 1 AQUAECO WASHROOM AND PLUMBING SOLUTIONS AQE-ECO-I302M-A-CP AQUAECO DECK MOUNTED TOUCHLESS TAP www.sanipexgroup.com...
  • Page 4: Specifications

    Warning For the safet y and smooth operation, please pay attent ion on the following warnings.  Please DON'T disassemble, repair or refit the products, because it might lead to electricity shock or product breakdown, unless stated otherwise.  Please DON'T install the products in humid place, especially in bathroom or Sauna room.
  • Page 5: Before Usage

    Before usage Please read this instruction manual carefully and fix the products correctly. 2. We reserve the rights to upgrade products without a notice. 3. Flush the water supply pipes thoroughly to remove debris. 4. Faucet is designed for tap water or potable water. 5.
  • Page 6 Installation position of the faucet Please take your purchased product as final, the outlook shown in the diagram might be different from the actual product. Referenced finished (Diagram ) height 200mm (single-cold type ) Tips: 1. Please make sure there is enough space for installation of control box of faucet.
  • Page 7 Installation of control box 1. Drill 2 pcs 5mm holes on the proposed wall according to the dimension shown on the diagram 2. and install the screws, then fix the control box onto the wall in accordance with diagram 3. Fix the S.S bracket located on the back of the host on the pre-installed screws). Spout 1.
  • Page 8 Installation or replacement of battery 1. Open the batter y cover of control box and take out the batter y case according to the diagram ①. 2. install 4 pcs AA batteries correctly and put the batter y case into the control box and fix its cover as per diagram ②.
  • Page 9: Troubleshooting

    Trouble shooting Corrective Action Symptoms Probable Causes No battery or wrongly connected Check the batteries No power supply or wrong connection Check the power supply and the conncetion No water flow Object in sensing range Remove the object (Indicator not flashing) Dirt on the sensing window Clean the sensing window The connector does not connect well...
  • Page 10 Note:...
  • Page 11 Note:...
  • Page 12 AQUAECO WASHROOM AND PLUMBING SOLUTIONS www.sanipexgroup.com IN-ECO-I302M-A-XX-02-24...